SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
23-03-15, 10:35 PM | #1 |
Guest
Posts: n/a
|
Base gasket change front cylinder
Bike is curvy and I have been chasing a small coolant leak for a little while now.
Its leaking from the base gasket on the right hand side and seems to only leak when the bike is hot. At first I thought it was some thing simple like a loose hose clamp, tightened them up but it continued, so used some coolant dye and a uv light to get to bottom of the problem and yep its the base gasket!. So questions are: Could this be related to my sticky coolant problem by any chance?. Is this a common problem that others have come across?. Has anyone experience of changing a base gasket?, I will be using Mr Haynes as a guide but is there any thing to watch out for?. Cheers. |
24-03-15, 01:31 PM | #2 |
Guest
Posts: n/a
|
Re: Base gasket change front cylinder
I'd say it's pretty rare, and I'd try re-torquing the head bolts before I'd pull the cylinder.
|
26-03-15, 12:49 AM | #3 |
Guest
Posts: n/a
|
Re: Base gasket change front cylinder
If its strange or rare it will happen to my engine for some reason!.
That's a good idea I'll give it a try, cheers. |
03-04-15, 10:37 AM | #4 |
Guest
Posts: n/a
|
Re: Base gasket change front cylinder
Job's done, looking at the gasket can see it had been leaking out to the side of the coolant passage!.
Its not a bad job to do. |
03-04-15, 12:15 PM | #5 |
Guest
Posts: n/a
|
Re: Base gasket change front cylinder
Re-torque or gasket replacement?
|
03-04-15, 03:29 PM | #6 |
Guest
Posts: n/a
|
Re: Base gasket change front cylinder
Gasket replacement!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front master cylinder change? | screamingnoob | Bikes - Talk & Issues | 6 | 10-10-13 12:12 AM |
Rear cylinder not firing after front cylinder rebuild | Littlewebber | Bikes - Talk & Issues | 2 | 17-07-13 08:45 PM |
HELP! K5 Front head gasket needed asap | Nobbylad | SV Talk, Tuning & Tweaking | 0 | 17-06-11 06:43 PM |
Cylinder Head Cover & Gasket for 2002 Curvy | slloyd | Stuff Wanted | 1 | 27-05-09 03:32 PM |
Blown front sproket oil gasket | Damoulianos Marios | SV Talk, Tuning & Tweaking | 6 | 28-05-07 09:14 AM |