Replacement chain adjuster plates? - SV650.org

SV400Rob · 31-01-11, 10:30 PM

After recently adjusting my chain, I found that the adjuster plates on the SV650S K3 are made of cheese and gauged marks in my swing arm as I un-did the wheel spindle. I have found these on ebay as a replacement. Has anyone tried them yet?

http://cgi.ebay.co.uk/suzuki-sv-650-...item3cb47f24a2

Thanks

Rob

Sid Squid · 31-01-11, 11:06 PM

Never seen thise ones before, but it's just a plate - as long as it fits I'm sure it will work fine.

I think you might be treading a new path for SV650.org - let us know how you get on

.

SV400Rob · 31-01-11, 11:09 PM

I've put a bid in so I'll keep you posted if they're any good. Can't really grumble for £12.50, worth a shot really.

Rob

SV400Rob · 02-02-11, 05:17 PM

Unfortunately I got outbid on these

Has anyone else changed the adjuster plates? If so, what did you replace them with?

Thanks

Bibio · 02-02-11, 05:32 PM

£16 for that piece of junk (no offence to the person that made them). if you can wait a wee while i'll have something a lot better. they will be getting punched within the next few weeks.

SV400Rob · 02-02-11, 05:37 PM

I'm in no rush to be honest. I was just searching through ebay to see what goodies I could buy for the SV and found them. Last time I adjusted the chain, as I undid the spindle nut the adjust plate moved with the nut and consequently I've got a carved swing arm and a bent adjust plate

Have you got any pictures?

Bibio · 02-02-11, 05:42 PM

no not of the exact item as they have not been done yet but i can pm you a drawing of the finished item. they will be made of stainless steel. and there will be different options for different applications.

chirpy999 · 02-02-11, 05:42 PM

I've had that on my 2005 . Had a new tyre fitted , they must have a gorilla working the spanners , it was too tight had to use a lot of force to undo the spindle adjuster plate bent , not had chance to sort it yet due to winter. Will probably try to straighten it in the vice.

SV400Rob · 02-02-11, 05:45 PM

Thanks Bibo.

I got mine in the B&D workbench and bent it back into shape, well its not perfect but close. It happens every time though.

Bibio · 02-02-11, 05:47 PM

problem i dont have the drawings here. but they are close to the original plates but with slight modifications. they will also come with marker notches. they will also be handed as in a left and right to fit the spindle exactly so they dont move about as much.

31-01-11, 10:30 PM	#1
SV400Rob Member Join Date: Dec 2008 Location: Stockport Posts: 141	Replacement chain adjuster plates? After recently adjusting my chain, I found that the adjuster plates on the SV650S K3 are made of cheese and gauged marks in my swing arm as I un-did the wheel spindle. I have found these on ebay as a replacement. Has anyone tried them yet? http://cgi.ebay.co.uk/suzuki-sv-650-...item3cb47f24a2 Thanks Rob

31-01-11, 11:06 PM	#2
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Re: Replacement chain adjuster plates? Never seen thise ones before, but it's just a plate - as long as it fits I'm sure it will work fine. I think you might be treading a new path for SV650.org - let us know how you get on . __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

31-01-11, 11:09 PM	#3
SV400Rob Member Join Date: Dec 2008 Location: Stockport Posts: 141	Re: Replacement chain adjuster plates? I've put a bid in so I'll keep you posted if they're any good. Can't really grumble for £12.50, worth a shot really. Rob

02-02-11, 05:17 PM	#4
SV400Rob Member Join Date: Dec 2008 Location: Stockport Posts: 141	Re: Replacement chain adjuster plates? Unfortunately I got outbid on these Has anyone else changed the adjuster plates? If so, what did you replace them with? Thanks

02-02-11, 05:32 PM	#5
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,552	Re: Replacement chain adjuster plates? £16 for that piece of junk (no offence to the person that made them). if you can wait a wee while i'll have something a lot better. they will be getting punched within the next few weeks. Last edited by Bibio; 02-02-11 at 05:33 PM.

02-02-11, 05:37 PM	#6
SV400Rob Member Join Date: Dec 2008 Location: Stockport Posts: 141	Re: Replacement chain adjuster plates? I'm in no rush to be honest. I was just searching through ebay to see what goodies I could buy for the SV and found them. Last time I adjusted the chain, as I undid the spindle nut the adjust plate moved with the nut and consequently I've got a carved swing arm and a bent adjust plate Have you got any pictures?

02-02-11, 05:42 PM	#7
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,552	Re: Replacement chain adjuster plates? no not of the exact item as they have not been done yet but i can pm you a drawing of the finished item. they will be made of stainless steel. and there will be different options for different applications.

02-02-11, 05:42 PM	#8
chirpy999 Member Join Date: May 2009 Posts: 46	Re: Replacement chain adjuster plates? I've had that on my 2005 . Had a new tyre fitted , they must have a gorilla working the spanners , it was too tight had to use a lot of force to undo the spindle adjuster plate bent , not had chance to sort it yet due to winter. Will probably try to straighten it in the vice.

02-02-11, 05:45 PM	#9
SV400Rob Member Join Date: Dec 2008 Location: Stockport Posts: 141	Re: Replacement chain adjuster plates? Thanks Bibo. I got mine in the B&D workbench and bent it back into shape, well its not perfect but close. It happens every time though.

02-02-11, 05:47 PM	#10
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,552	Re: Replacement chain adjuster plates? problem i dont have the drawings here. but they are close to the original plates but with slight modifications. they will also come with marker notches. they will also be handed as in a left and right to fit the spindle exactly so they dont move about as much.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
chain Adjuster	thebluelion	Stuff Wanted	12	16-07-10 08:11 PM
chocolate chain adjuster plates	dmracing	SV Talk, Tuning & Tweaking	6	01-08-09 09:23 PM
Chain adjuster plates	dmracing	Stuff Wanted	6	24-07-07 05:54 PM
chain adjuster problem	steveg	SV Talk, Tuning & Tweaking	6	11-09-06 06:01 PM
Stainless adjuster plates.....................bling	svrash	SV Talk, Tuning & Tweaking	19	23-04-06 07:22 PM