parts needed for 2001 - SV650.org

27-11-05, 02:04 AM

in need of......
complete instrument panel or aftermarket tach/oil/temp gauge

headlight bracket

handle bars

will an instrument panel from a 650S fit a 650 same year???

TSM · 27-11-05, 02:47 AM

All clocks from the same series of bikes (eg. pointy & curvey) will fit each other.

If you are talking about putting a set of clocks from a faired bike on an unfaired then its a diffrent thing. You will need the front sub frame for a faired bike and it will fit. The frames of the curvey and faired are the same so it will mount correctly to the headstock, but then you will have a problem fitting the normal single light. The loom is a tad diffrent.

Have looked at http://www.banditmania.co.uk/digital_clocks.htm for aftermarket clocks.

27-11-05, 03:10 PM

Here is an ebay ad for an instrument panel....will that fit my 2001 650....it is slightly different in looks and not sure how it attaches to the bike...if anyone can give me some input it'd be greatly appreciated.
http://cgi.ebay.com/ebaymotors/1999-...92929229QQrdZ1

We aquired my SV from our son who wrecked it( he is ok, but doesn't want the bike anymore) so we are fixing it up....was debating on fixing it for track or street.

Anyone know of an aftermarket tach/oil pressure gauge that'd be compatible with the ECU???

27-11-05, 03:14 PM

Oh....I am new to SV's so not sure the difference between pointy & curvy....I would think it would be the year of the bike and how it was made...I think mine is curvy...but please explain this to me...thanks!!!
My bike ( before wreck)

northwind · 27-11-05, 07:59 PM

That is a curvy- and a good looking one at that. Pointies are... well... pointy.

Basically, all the curvy SVs with that sort of frame are carbed, and while there's a few variations from year to year they're pretty much interchangable. All the ones with the different frame (and the twin LED tail lights) are pointy, have fuel injection, and assorted differences from year to year. The two versions of the SV share surprisingly few parts.

27-11-05, 02:04 AM	#1
hduc Guest Posts: n/a	parts needed for 2001 in need of...... complete instrument panel or aftermarket tach/oil/temp gauge headlight bracket handle bars will an instrument panel from a 650S fit a 650 same year???

27-11-05, 02:47 AM	#2
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	All clocks from the same series of bikes (eg. pointy & curvey) will fit each other. If you are talking about putting a set of clocks from a faired bike on an unfaired then its a diffrent thing. You will need the front sub frame for a faired bike and it will fit. The frames of the curvey and faired are the same so it will mount correctly to the headstock, but then you will have a problem fitting the normal single light. The loom is a tad diffrent. Have looked at http://www.banditmania.co.uk/digital_clocks.htm for aftermarket clocks. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

27-11-05, 07:59 PM	#5
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,082	That is a curvy- and a good looking one at that. Pointies are... well... pointy. Basically, all the curvy SVs with that sort of frame are carbed, and while there's a few variations from year to year they're pretty much interchangable. All the ones with the different frame (and the twin LED tail lights) are pointy, have fuel injection, and assorted differences from year to year. The two versions of the SV share surprisingly few parts. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sv650 curvy 2001 parts wanted	pauldogs	Stuff Wanted	8	27-04-09 05:34 PM
sv650 2001 parts needed LOOK!	chompy	Stuff Wanted	3	21-03-09 08:06 PM
regulator needed, curvy 2001	NadineDieBiene	Stuff Wanted	10	03-11-07 05:31 PM
2001 Curvey S Parts needed!	plowsie	Stuff Wanted	13	20-02-07 02:40 PM
2001 sv650 engine problems, help needed	Dreadhead	SV Talk, Tuning & Tweaking	5	15-03-06 01:42 PM

27-11-05, 03:10 PM	#3
hduc Guest Posts: n/a	Here is an ebay ad for an instrument panel....will that fit my 2001 650....it is slightly different in looks and not sure how it attaches to the bike...if anyone can give me some input it'd be greatly appreciated. http://cgi.ebay.com/ebaymotors/1999-...92929229QQrdZ1 We aquired my SV from our son who wrecked it( he is ok, but doesn't want the bike anymore) so we are fixing it up....was debating on fixing it for track or street. Anyone know of an aftermarket tach/oil pressure gauge that'd be compatible with the ECU???

27-11-05, 03:14 PM	#4
hduc Guest Posts: n/a	Oh....I am new to SV's so not sure the difference between pointy & curvy....I would think it would be the year of the bike and how it was made...I think mine is curvy...but please explain this to me...thanks!!! My bike ( before wreck)