Electrical info Required.

Hi All,

Hope someone can help with a little but annoying problem I have. Sunday my SV let me down miles away from home. When i turned the ignition switch 'ON' there was nothing, completely dead. I spent an hour removing the seat, tank etc to find the fault. Luckily I did! There was a bad connection on the main Ignition Switch plug that connects to the loom. In the comfort of the workshop, I removed everything again and gained access to the connector in question. On close examination the main live feed connector was 'Burnt' and the connector melted.

This is where I need the help.
I've removed the connector shells off both half and the rest of the terminals are fine. Does anyone know where I can get a new connector from?

I look forward with fingers crossed!!

Thanks

Adam

[yorkie_chris]

Try vehicle wiring products or Ferret

Cheers......i'll give them ago!

[Dave20046]

jeese, that time of year for the electric gremlins lol

i had the very same problem but my plug was corroded not burnt, ive managed to cable-tie the wires down so no movement will disturb it tryin to get the old man (auto electrician) to rewire it, its still cable-tied 8months on and no probs yet (goes to find some wood)

[dizzyblonde]

Originally Posted by yorkie_chris

Try vehicle wiring products or Ferret

+1 for Ferret, if you can afford him. Nice hippy type chap, comes in a battered van(or at least he used to)
Really down to earth guy, what he don't know about electrics nobody knows.

LOL, just peeped at the gallery on his webpage, I remember when half of those photos were taken....I were there!

Originally Posted by dizzyblonde

+1 for Ferret, if you can afford him. Nice hippy type chap, comes in a battered van(or at least he used to)
Really down to earth guy, what he don't know about electrics nobody knows.

LOL, just peeped at the gallery on his webpage, I remember when half of those photos were taken....I were there!

Electrical Guy? Down to earth? Please stop comedy.

[dizzyblonde]

AHA never noticed that!