B*ll*cks - SV650.org

19-03-05, 03:27 PM

Just trashed my front right calipper. Anyone got one that I can have before Monday????

Hopes are not high

19-03-05, 03:30 PM

Quote:

Originally Posted by BigApe

Just trashed my front right calipper. Anyone got one that I can have before Monday????

Hopes are not high

how?

19-03-05, 03:36 PM

Tried to drill out siezed pin and made a right pigs ear of it.

21QUEST · 19-03-05, 04:22 PM

Silly you

. If you don't get one by 5.PM give me a ring. I've got a set.

Cheers
Ben

19-03-05, 04:45 PM

If you buy 21quests's I'll pay for your old piston pots from the knackered ones if they are in good nick (not plyered out).

Andy.

TSM · 19-03-05, 04:58 PM

Ive got a set of K3-4 calipers, hoses, and master cylinder plus lever that a bought a couple of weeks ago, they will fit the K1-K2.

I just have to think about if i am kind enough or sensible enough to sell them. Ummmm

TSM · 19-03-05, 04:59 PM

and a 1L bottle of fluid

19-03-05, 07:15 PM

Thanks for your help guys. I have sorted of bodged it at the moment and got the job done. I ran out of day light so have not yet taken the bike out to see if the job is good enough. But basically I drilled out the old pin that had siezed and the holes are now larger than they should be. I will take it for a ride tomorrow and see how it fairs.

Ben thanks for the pm, you have pm back.

19-03-05, 03:27 PM	#1
Stig Guest Posts: n/a	*Bllcks* Just trashed my front right calipper. Anyone got one that I can have before Monday???? Hopes are not high

19-03-05, 04:58 PM	#6
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Ive got a set of K3-4 calipers, hoses, and master cylinder plus lever that a bought a couple of weeks ago, they will fit the K1-K2. I just have to think about if i am kind enough or sensible enough to sell them. Ummmm __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

19-03-05, 04:59 PM	#7
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	and a 1L bottle of fluid __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

19-03-05, 03:36 PM	#3
Stig Guest Posts: n/a	Tried to drill out siezed pin and made a right pigs ear of it.

19-03-05, 04:45 PM	#5
snoopy Guest Posts: n/a	If you buy 21quests's I'll pay for your old piston pots from the knackered ones if they are in good nick (not plyered out). Andy.

19-03-05, 07:15 PM	#8
Stig Guest Posts: n/a	Thanks for your help guys. I have sorted of bodged it at the moment and got the job done. I ran out of day light so have not yet taken the bike out to see if the job is good enough. But basically I drilled out the old pin that had siezed and the holes are now larger than they should be. I will take it for a ride tomorrow and see how it fairs. Ben thanks for the pm, you have pm back.