HELP tool needed for engine work - SV650.org

23-04-09, 12:26 PM

Can someone please help shed some light on this problem, I've got to remove my engine to replace my gear selector rod/forks but have struck a problem, after removing all engine mounting bolts there appears to be another inner bolt holding the engine in place. I've been through the workshop manual and the suzuki one to find that i need a peg spanner/socket (its like a 3 pronged tool) to remove this bolt.

But I can't find one anywhere on the high-street or the internet, so if anyone on here knows of what i can use to remove my engine I'll be really thankful.

thanks for all your replies in advance.

-Jason AKA Pokerboy

23-04-09, 01:30 PM

Is this what you're looking for?

Link to eBay

yorkie_chris · 23-04-09, 01:32 PM

22mm socket + angle grinder

23-04-09, 04:15 PM

thanks for your link to ebay, hell I searched high and low for this tool and never found anyone to be selling it. thank you so much, now I can get on with the job in hand.

Yorkie Chris love your suggestion would of gone for that but I don't own an angle grinder

thanks again people sound advise/support as always.

TeddyBearKing · 23-04-09, 05:55 PM

could you post up a picture of the nut in question? if its not what RatchetJob has already linked you to

23-04-09, 12:26 PM	#1
Pokerboy89 Guest Posts: n/a	HELP tool needed for engine work Can someone please help shed some light on this problem, I've got to remove my engine to replace my gear selector rod/forks but have struck a problem, after removing all engine mounting bolts there appears to be another inner bolt holding the engine in place. I've been through the workshop manual and the suzuki one to find that i need a peg spanner/socket (its like a 3 pronged tool) to remove this bolt. But I can't find one anywhere on the high-street or the internet, so if anyone on here knows of what i can use to remove my engine I'll be really thankful. thanks for all your replies in advance. -Jason AKA Pokerboy

23-04-09, 01:30 PM	#2
RatchetJob Guest Posts: n/a	Re: HELP tool needed for engine work Is this what you're looking for? Link to eBay

23-04-09, 01:32 PM	#3
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: HELP tool needed for engine work 22mm socket + angle grinder __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

23-04-09, 04:15 PM	#4
Pokerboy89 Guest Posts: n/a	Re: HELP tool needed for engine work thanks for your link to ebay, hell I searched high and low for this tool and never found anyone to be selling it. thank you so much, now I can get on with the job in hand. Yorkie Chris love your suggestion would of gone for that but I don't own an angle grinder thanks again people sound advise/support as always.

23-04-09, 05:55 PM	#5
TeddyBearKing Member Join Date: Jun 2008 Location: Bristol Posts: 130	Re: HELP tool needed for engine work could you post up a picture of the nut in question? if its not what RatchetJob has already linked you to __________________ ~SV650S K5 swearing in french is like wiping your *** with silk*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine removal tool	sickboygti	Stuff Wanted	8	30-09-07 06:49 AM
on the hunt again/ engine socket tool	mart	SV Ecosse	14	25-08-07 06:33 PM
tool for removing swing arm and engine	fat_brstd	Stuff Wanted	6	08-05-07 12:00 PM
Suzuki engine removal tool	tomjones2	SV Talk, Tuning & Tweaking	4	26-08-06 01:13 PM
Special Tool needed to remove engine?	Daimo	SV Talk, Tuning & Tweaking	3	22-07-06 11:00 AM