SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
01-05-05, 10:52 AM | #1 |
Guest
Posts: n/a
|
Sun bar risers
Hi All,
Just fitted a set of bar risers from Visionary Technologies (Sun bar riser kits) to my '99 S. What a difference! Much more flickable, great round town and full adjustable for those loony back lane days. Anyone else tried 'em? Regards Rich |
01-05-05, 11:41 AM | #2 |
John T
Mega Poster
Join Date: May 2003
Location: Shrewsbury, Shrops, UK
Posts: 2,455
|
Yes me. And I agree with all your comments.
Did you glue yours? John
__________________
Admin for this forum and the main site. John@sv650.org |
01-05-05, 03:41 PM | #3 |
Guest
Posts: n/a
|
i've just fitted them to my TL1000S...clipons are about 4 cms higher, and 3 cms wider (per bar), i used loctite 648 or something between the bars and risers ( cylindrical surfaces fixation), and it doesn't move at all!
i really like 'em alot, the bike is more flickable, unvoluntary wheelies happen more, and no more backache! i had 'em gold anodized too |
01-05-05, 06:11 PM | #4 |
Guest
Posts: n/a
|
Does it involve extending any cables or electrics?
And what glue would you use? |
01-05-05, 06:30 PM | #5 |
Guest
Posts: n/a
|
Hi folks - where can I get hold of a set of these and how much?
|
01-05-05, 06:55 PM | #6 |
Guest
Posts: n/a
|
http://www.cliponrisers.com/
in my case, all cables were good, except for the fast idle cable, which is going to have to be made longer. Dunno about esvee's though. I had to trim the fairing too. |
01-05-05, 08:07 PM | #7 |
John T
Mega Poster
Join Date: May 2003
Location: Shrewsbury, Shrops, UK
Posts: 2,455
|
I had to fit a longer brake line. I needed to replace the lines anyway so I did both jobs at the same time.
I wasn't sure what glue to use. Sunriser suggest an epoxy glue, so I used araldite. John
__________________
Admin for this forum and the main site. John@sv650.org |
01-05-05, 09:35 PM | #8 |
Guest
Posts: n/a
|
John,
How much are they and are they easy to fit ? Claire.. |
01-05-05, 10:07 PM | #9 | |
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
Quote:
Is there a possability of buying in bulk if several people want them, we might get a discount.
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
01-05-05, 10:33 PM | #10 | |
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
Quote:
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bar Risers | cammy | SV Talk, Tuning & Tweaking | 2 | 26-04-09 12:16 PM |
bar risers | wow | SV Talk, Tuning & Tweaking | 14 | 19-06-08 06:16 AM |
Bar Risers | 600+ | Bikes - Talk & Issues | 0 | 13-05-08 05:04 AM |
Sun Risers... again. | tigersaw | SV Talk, Tuning & Tweaking | 11 | 03-05-06 11:12 AM |
Sun Risers | scousegit | SV Talk, Tuning & Tweaking | 5 | 14-06-05 11:28 AM |