SV 650 Laser ex-treme exhaust (twin end cans)

got a set for sale on ebay if anyone interested.
any questions just pm or e-mail me. thanks

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=150348686069

baskie

Pm'd

Funnily enough.. just was looking at these.. hahah

How do you get around the Indicator and Number plate issues with this setup ?

Originally Posted by xXBADGERXx

How do you get around the Indicator and Number plate issues with this setup ?

The laser cans come with a tail-tidy which the cans bolt onto. on my set i used the standard size plate on mine but needed to shave bout 3mm offa it either side to avoid contact

the laser tail-tidy does not however come with indicator mounts!!! simple fix was get a universal tidy (like r-send, bike-it or summit from halfrauds) and use the indicator mounts to bolt onto existing stuffz.

very VERY nice set o pipes btw

Amp

Edit -- i just looked at the pics on ebay and the cans look quite close together from the back, finks its jus coz its newer model SV and has lower rear subframe (my set was on a K3 and the cans were further apart at the back due to the higher rear end....the pipes were designed for the K3 i believe but do fit all years)

Originally Posted by Amplimator

The laser cans come with a tail-tidy which the cans bolt onto. on my set i used the standard size plate on mine but needed to shave bout 3mm offa it either side to avoid contact

the laser tail-tidy does not however come with indicator mounts!!! simple fix was get a universal tidy (like r-send, bike-it or summit from halfrauds) and use the indicator mounts to bolt onto existing stuffz.

very VERY nice set o pipes btw

Amp

Edit -- i just looked at the pics on ebay and the cans look quite close together from the back, finks its jus coz its newer model SV and has lower rear subframe (my set was on a K3 and the cans were further apart at the back due to the higher rear end....the pipes were designed for the K3 i believe but do fit all years)

thats about it. lol. 7" X 5" plate looks nice on the back. indicators is a little issue but with alittle bit of know how u can rig something up im sure, thse intergrated tail lights will look hot as fook but some people dont aggree with them,

thanks for looking

baskie

but yeh u are right they are a bit close together on the black fram models but they still fit fine.

I just went on ebay - now I'm sorry but rules is rules - no reserve - I'm gonna get these babys for £36...Yess!

[jamesterror]

tooo tempted, we'll see

So you deffo lose the rear pillion pegs with these things on then ?

Although I like them, I'd rather eat £400 than have to do all these things..