sv cousin calipers help please

I am new in your forum and i like to give me some of your knowlege about
Frond and rear calipers .I have DL650ABS which has i think the same calipers with SV650
My brakes are not enough,and i am looking for interchangeable 4 or 6 pistons calipers to fit.
Do not tell me about pads or lines i already have them also 19mm master cylinder.Just if i can
Fit some better calipers from SV1000 or other mondels for example .in advance thanks for your answers.

Help please i read all the post about calipers in SV650 but i didn’t understood which caliper 4
piston fit and which is not. Please tell me which caliper can i use, which model and if i need
adapter where can i faind it. I have dl650ABS which has the same calipers with SV650.

In advance thanks for your answers

I dont think you will find any other calipers that will fit, as calipers are a pretty unique thing. Mounting holes differ from bike to bike and especially if you are looking for more powerful brakes. You say you have already put braided hoses on and better pads. And all of this didnt improve anything? At the end of the day its a DL so the R&D boys at Suzuki wouldnt have really put too much effort into spectacular brakes, same as the SV really. Hope you manage to sort something out but I dont think you will TBH.

I need the power, i'm fast 140kg men.Calipers is the same to SV

Parachute?????
Or dont drive so fast????

You can have some adapter plates made up to mount different calipers. There was a company doing it here in the states, but have quit making
them. Here is my SV with 02 GSXR750 4 piston calipers mounted. Works great I must say.

And a shot from the right side of my buddies 05 SV

I try to sent an email but it dooes'nt work, you have
anything else to look?
I email in this Ken at info@csm-w.com

I'm sorry that's it, I don't have anything else. The company I got mine from quit making them. The plates weren't perfect by any means. I have 4 different spacers (shims) on each mounting bolt. My friend had to do the same thing. A good machine shop should be able to make some plates that would work, but it might be pricey. I know you said you've tried pads, which ones? Vesrah RJL's rock, with a set of stainless lines you will have way better brakes. A radial master cylinder would be a big help too.
Later...

So i make this: 2 Calipers front CBR900R 97 4pot 45 USD (is the best Nissin ever)
1 rear caliper CBR900RR 99 2pot 33 USD (to ebay)
adapters made to CNC front-rear 135 USD
EBC Prolite contur rotors 550 USD
thanks for your answers,more if i end