 |
 |
22-08-08, 11:07 AM
|
#1 |
|
Guest
Posts: n/a
|
Damper Rods: 99 - 02 Curvy
As it says, I would like to get hold of a pair of front fork damper rods for a 2001 curvy. Would prefer to get a set of standard damper rods, but as I'm fitting emulators I would also consider a pair of rods that have been modified.
(For modified rods they should not have extra holes drilled in the lower part of the rod, and the 4 holes in the lower part should be no larger than Ø11mm. Rebound hole in the top of the rod closed or unclosed, I can have that welded shut as required.) thanks peeps 
|
|
|
22-08-08, 07:03 PM
|
#2 |
|
Guest
Posts: n/a
|
Re: Damper Rods: 99 - 02 Curvy
i have a set of forks im breaking which bit is the damper rods?
i've taken off the preload caps and removed everything down to the springs |
|
|
|
24-08-08, 01:02 PM
|
#3 |
|
Guest
Posts: n/a
|
Re: Damper Rods: 99 - 02 Curvy
See the picture of the internals including the damper rods for the forks on this thread. http://forums.sv650.org/showthread.p...ulators&page=5
it's at the bottom of page 5 |
|
|
|
25-08-08, 03:25 PM
|
#4 |
|
Guest
Posts: n/a
|
Re: Damper Rods: 99 - 02 Curvy
i have my damper rods then, i'll get them out of the forks tonight if you want them? pm me an offer.
|
|
|
|
27-08-08, 04:32 PM
|
#5 |
|
Guest
Posts: n/a
|
Re: Damper Rods: 99 - 02 Curvy
pm'd
|
|
|
 |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| do you get the damper rods out? | charlie13 | SV Talk, Tuning & Tweaking | 11 | 28-08-08 12:40 PM |
| SV650s 1999 Curvy Damper Bolt (For Forks) Wanted | cudd | Stuff Wanted | 2 | 26-08-07 08:23 PM |
| Damper Bolt For Fork, sv650s 1999 curvy | cudd | SV Talk, Tuning & Tweaking | 7 | 24-08-07 11:03 PM |
| Extremetech Steering damper + fitting kit 4 Curvy | SVmonkey | For Sale - SV's and SV related items | 5 | 17-08-07 06:57 PM |
| damper rods - loosening/tightening | weazelz | SV Talk, Tuning & Tweaking | 11 | 28-09-06 12:56 PM |
