SV1000 throttle body size? - SV650.org

fastdruid · 03-05-12, 03:33 PM

Does anyone know the OD of the SV1000 throttle bodies at the inlet side?

svsam · 03-05-12, 03:36 PM

No, but i have heard that the dl1000 (i think) is a better upgrade, jhs do a set for about the £400 mark i think.
This is providing you are just looking to upgrade a 650, in not i am no help at all....sorry.

andrewsmith · 03-05-12, 03:38 PM

I think its 54mm (not sure if that ID or OD)

You building a supertwin by anychance?

svsam · 03-05-12, 03:42 PM

Googled, 52mm, same as the dl 1000.

03-05-12, 03:44 PM

i get you the exact size at about 7pm if no one else pops up

03-05-12, 06:11 PM

inlet bottom eg inlet rubber side 68.09mm od

inlet top eg airbox side 63.00 mm od

inlet top 56.44 mm id

inlet bottom long 60.75mm id widest point 51.35mm id (droplet shaped bottom)

hth

fastdruid · 03-05-12, 06:35 PM

Cheers Dave, that's slightly disappointing, I was hoping it was going to be the same as the TLR (about 61mm)

Afraid its not SV or even v-twin related, more V8 related.

andrewsmith · 03-05-12, 06:37 PM

WTF you building?

fastdruid · 03-05-12, 06:51 PM

A GT40 with a 4l V8, I was just wondering if instead of the hayabusa throttle bodies (which everyone wants and are rather pricy) ] could instead use TLR (I've already picked up one set for £1+ postage).

Except the inlet adapters are £45 EACH! So I was wondering as the SV1k shares the same (ish) engine and has the same size id throttle bodies if the adapters might fit and have a higher availability as I'm pretty sure more SV1k's were sold than TLR's.

Couldn't find the od anywhere though so asked here as figured someone was bound to have a spare set they could measure!

andrewsmith · 03-05-12, 06:59 PM

Mad mad man

Druid, try the states they are normally cheaper

03-05-12, 03:33 PM	#1
fastdruid Member Mega Poster Join Date: Jul 2003 Location: W Mids Posts: 2,037	SV1000 throttle body size? Does anyone know the OD of the SV1000 throttle bodies at the inlet side? __________________ '00 SV700S - '94 RVF400R - '97 RVF400R - '88 VFR750F

03-05-12, 03:36 PM	#2
svsam Member Join Date: Jun 2010 Location: Shropshire Posts: 195	Re: SV1000 throttle body size? No, but i have heard that the dl1000 (i think) is a better upgrade, jhs do a set for about the £400 mark i think. This is providing you are just looking to upgrade a 650, in not i am no help at all....sorry. __________________ SL0 jack up kit-yoshimura can-tial tidy-(so far)

03-05-12, 03:38 PM	#3
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: SV1000 throttle body size? I think its 54mm (not sure if that ID or OD) You building a supertwin by anychance? __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

03-05-12, 03:42 PM	#4
svsam Member Join Date: Jun 2010 Location: Shropshire Posts: 195	Re: SV1000 throttle body size? Googled, 52mm, same as the dl 1000. __________________ SL0 jack up kit-yoshimura can-tial tidy-(so far)

03-05-12, 03:44 PM	#5
davepreston Guest Posts: n/a	Re: SV1000 throttle body size? i get you the exact size at about 7pm if no one else pops up

03-05-12, 06:11 PM	#6
davepreston Guest Posts: n/a	Re: SV1000 throttle body size? inlet bottom eg inlet rubber side 68.09mm od inlet top eg airbox side 63.00 mm od inlet top 56.44 mm id inlet bottom long 60.75mm id widest point 51.35mm id (droplet shaped bottom) hth

03-05-12, 06:35 PM	#7
fastdruid Member Mega Poster Join Date: Jul 2003 Location: W Mids Posts: 2,037	Re: SV1000 throttle body size? Cheers Dave, that's slightly disappointing, I was hoping it was going to be the same as the TLR (about 61mm) Afraid its not SV or even v-twin related, more V8 related. __________________ '00 SV700S - '94 RVF400R - '97 RVF400R - '88 VFR750F

03-05-12, 06:37 PM	#8
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: SV1000 throttle body size? WTF you building? __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

03-05-12, 06:51 PM	#9
fastdruid Member Mega Poster Join Date: Jul 2003 Location: W Mids Posts: 2,037	Re: SV1000 throttle body size? A GT40 with a 4l V8, I was just wondering if instead of the hayabusa throttle bodies (which everyone wants and are rather pricy) ] could instead use TLR (I've already picked up one set for £1+ postage). Except the inlet adapters are £45 EACH! So I was wondering as the SV1k shares the same (ish) engine and has the same size id throttle bodies if the adapters might fit and have a higher availability as I'm pretty sure more SV1k's were sold than TLR's. Couldn't find the od anywhere though so asked here as figured someone was bound to have a spare set they could measure! __________________ '00 SV700S - '94 RVF400R - '97 RVF400R - '88 VFR750F

03-05-12, 06:59 PM	#10
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: SV1000 throttle body size? Mad mad man Druid, try the states they are normally cheaper __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What Size Are The Throttle Body Clamp Screws?	Epic Monkey	Bikes - Talk & Issues	3	24-02-12 02:15 PM
SV1000 throttle body balancing	Mark_h	SV Talk, Tuning & Tweaking	9	23-05-10 11:25 AM
Throttle body balancing	RingDing	SV Talk, Tuning & Tweaking	22	29-04-09 02:12 PM
Throttle body question	Joe110	SV Talk, Tuning & Tweaking	2	20-01-06 10:53 PM
Throttle body diameter	danci1973	SV Talk, Tuning & Tweaking	1	05-12-04 11:34 AM