Battery terminal repair? - SV650.org

DarrenSV650S · 24-06-11, 04:44 PM

The lead terminals on the sv's battery are knackered. Is there anywhere you can get them replaced or repaired?

24-06-11, 05:38 PM

http://www.ronayers.com/Fiche/TypeID...SV650_SV650S)_

andrewsmith · 24-06-11, 11:25 PM

Breakers mate or as HU's linked

DarrenSV650S · 24-06-11, 11:44 PM

It's the terminal on the battery, not the wiring loom. Trying to avoid buying a new battery

andrewsmith · 25-06-11, 12:24 AM

Ah right

What states it in?
Its a

moment

muzikill · 25-06-11, 08:05 AM

can you drill a new hole in and nut and bolt ? or clamp? . btw im interested to know how its fookt?

DarrenSV650S · 25-06-11, 10:44 AM

Not sure how well it would drill. It's like the lead has slowly spread apart

andrewsmith · 25-06-11, 12:41 PM

Id get a file and remove the excess metal, bend the terminal straight.
Get a small piece of steel or brass, bend it over the ok terminal and drill it to the right size hole.

Mate looking at that you may have a elecrical issue as that has had massive heat over it

DarrenSV650S · 25-06-11, 01:15 PM

I think i might struggle to get the loom connector over another bit of metal

Na its always been that funny shape. I think its just the pressure of the bolt that has made it seperate

andrewsmith · 25-06-11, 01:39 PM

what you got running over the battery?
Never thought about using another fuse board?

24-06-11, 04:44 PM	#1
DarrenSV650S Member Mega Poster Join Date: Jul 2006 Location: Dundee Posts: 4,405	Battery terminal repair? The lead terminals on the sv's battery are knackered. Is there anywhere you can get them replaced or repaired?

24-06-11, 05:38 PM	#2
Holdup Guest Posts: n/a	Re: Battery terminal repair http://www.ronayers.com/Fiche/TypeID...SV650_SV650S)_

24-06-11, 11:25 PM	#3
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: Battery terminal repair Breakers mate or as HU's linked __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

24-06-11, 11:44 PM	#4
DarrenSV650S Member Mega Poster Join Date: Jul 2006 Location: Dundee Posts: 4,405	Re: Battery terminal repair It's the terminal on the battery, not the wiring loom. Trying to avoid buying a new battery

25-06-11, 12:24 AM	#5
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: Battery terminal repair Ah right What states it in? Its a moment __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

25-06-11, 08:05 AM	#6
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Re: Battery terminal repair can you drill a new hole in and nut and bolt ? or clamp? . btw im interested to know how its fookt? __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

25-06-11, 10:44 AM	#7
DarrenSV650S Member Mega Poster Join Date: Jul 2006 Location: Dundee Posts: 4,405	Re: Battery terminal repair Not sure how well it would drill. It's like the lead has slowly spread apart

25-06-11, 12:41 PM	#8
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: Battery terminal repair Id get a file and remove the excess metal, bend the terminal straight. Get a small piece of steel or brass, bend it over the ok terminal and drill it to the right size hole. Mate looking at that you may have a elecrical issue as that has had massive heat over it __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

25-06-11, 01:15 PM	#9
DarrenSV650S Member Mega Poster Join Date: Jul 2006 Location: Dundee Posts: 4,405	I think i might struggle to get the loom connector over another bit of metal Na its always been that funny shape. I think its just the pressure of the bolt that has made it seperate

25-06-11, 01:39 PM	#10
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: Battery terminal repair what you got running over the battery? Never thought about using another fuse board? __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
battery terminal bolts	Cam_73	SV Talk, Tuning & Tweaking	2	08-12-09 07:59 PM
Battery Terminal Bolts	JediGoat	SV Talk, Tuning & Tweaking	6	12-05-08 12:03 PM
Terminal 5....	DanDare	Idle Banter	16	29-03-08 10:40 AM
Heathrow - terminal 1	duffbattye	Bikes - Talk & Issues	3	14-11-06 01:02 PM
Positive battery terminal needed	TK2216UKG	Stuff Wanted	7	23-03-06 04:44 PM