GSXR 600 K1 Forks & Bottom Yoke for SV650 K3+ Conversion

Complete with clipons,

there is a little damage to the top of one of the fork legs - doesn't affect the performance - just the eye!

Will post pics after the weekend.

So,
Front forks wih good seals - no leaks,
Wheel spindle and spacer
bottom yoke with stem
LHS and RHS clip ons.

?100 quick sale.

Can deliver in London or post for ?20.



P.s. - got a front wheel too, was going to use on my GSXR unless you ??? can ??? persuade ??? me ??? Otherwise!

I'm very interested in this, what else is required for the conversion? Also what colour is the wheel?

Hey,

I believe on a pointy the conversion is a bolt on,
I haven't done the K series - pointy SV conversion. Only the SRAD - Curvy. I'm sure one or two members or the org have done it to their pointys. :bandit:

Well I have three wheels and two GSXRs. I wanted to keep a spare set of wheel for my race bike (GSXR6K1). But we can talk about that later - Two of the wheels are black and the other white.

I actually have another wheel too, although it is cracked at a spoke and might be a little kinked. If you know anyone up North who can sort wheels it could be good for you? A tenner buys it (only if you grabs the forks too though...)

Are these Usd then I can't rememer with the K1's.

Though I'm interested for a curvy...

Nah, they are RWU versions.

The 600 got USD on the K4+ models,

Are the gsxr wheels the same to look at as the sv ones? Also whats the script with the speedo? Is it a bodge job?

[phil24_7]

How much for a front wheel and what condition are they in?

Regards

Originally Posted by svdemon

Are the gsxr wheels the same to look at as the sv ones? Also whats the script with the speedo? Is it a bodge job?

AFAIK, the K series wheels match the K3+ wheels, like the SRAD wheels matching the pre K3 SV's.

As for the Speeso - Think you'll need to run a sensor on the rear wheel or front sprocket cover,

Try a search on here for past threads, I'm sure I've read about someone doing the conversion...

Originally Posted by phil24_7

How much for a front wheel and what condition are they in?

Regards

Hi Phil,

TBH, I'm still not sure if I selling to fronts...

- Black, true - to be powder coated white
- Black, with a slight flat spot
- White, true but paint not the best
- White, flight spot, crack and grubby paint

Is your front wheel damaged? or were you looking for a spare?

[phil24_7]

I would be interested in a true straight wheel to paint white for a colour change. This will give me a complete set of spare wheels and panels for when the inevitable happens!

It will be for road use. Finish isn't important but straight and no gouges is!