Rear Brake Pedal Removal??? - SV650.org

06-08-05, 10:51 AM

Hi Guys,

I need to change my Rear Brake pedal on my SV650S K5 but cannot see how to undo the bolt that holds the footpeg holder on? I thought it would be a allen key but I cant really see it very well so any ideas before I take a pair of grips to the bolt!!!!

I await your words of advice!

cheers

06-08-05, 12:07 PM

It is an allen key, but not one you'll find in the SV toolkit. You'll have to get one.

06-08-05, 05:26 PM

yep, for all of those who dont know ....

It's an 8mm Allen Key !!!!!

oooooooooo aaahhhhhhhhhh

07-08-05, 04:25 PM

Rear brake pedal??? K5 you say??? did ya grind it off on a roundabout??
or something a little...erm..."less stylish" ? Heh heh.

07-08-05, 04:27 PM

oooo goody i needed to ask this question mine broke when i came off on a roundabout. so it an 8mm allen key is it easy to do

12-08-05, 02:02 PM

Yup...undo the 2(?) bolts holding on the entire plate, turni it slightly until you can get an allen bit and spanner/ratchet +bit holder onto the bolt...loosen,replace...tighten...reassemble!

Do people still use allen keys?

12-08-05, 02:15 PM

don't forget that you'll need a pair of needle nose pliers to bend the split pin on the rod connecting to the master cylinder.

06-08-05, 10:51 AM	#1
MarkyBoy Guest Posts: n/a	Rear Brake Pedal Removal??? Hi Guys, I need to change my Rear Brake pedal on my SV650S K5 but cannot see how to undo the bolt that holds the footpeg holder on? I thought it would be a allen key but I cant really see it very well so any ideas before I take a pair of grips to the bolt!!!! I await your words of advice! cheers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
99-02 rear brake pedal	Marcus	Stuff Wanted	17	14-04-09 07:27 PM
rear brake pedal?	seano	Stuff Wanted	0	12-04-07 07:29 PM
Rear Brake Pedal	01 sv650s	Stuff Wanted	1	29-03-07 10:11 PM
Rear Brake Pedal	01 sv650s	Stuff Wanted	0	29-03-07 07:59 PM
Rear Brake Pedal	teknovision2	Stuff Wanted	1	24-07-06 06:21 PM

06-08-05, 12:07 PM	#2
Flamin_Squirrel Guest Posts: n/a	It is an allen key, but not one you'll find in the SV toolkit. You'll have to get one.

06-08-05, 05:26 PM	#3
MarkyBoy Guest Posts: n/a	yep, for all of those who dont know .... It's an 8mm Allen Key !!!!! oooooooooo aaahhhhhhhhhh

07-08-05, 04:25 PM	#4
jamesobrady Guest Posts: n/a	Rear brake pedal??? K5 you say??? did ya grind it off on a roundabout?? or something a little...erm..."less stylish" ? Heh heh.

07-08-05, 04:27 PM	#5
hall13uk Guest Posts: n/a	oooo goody i needed to ask this question mine broke when i came off on a roundabout. so it an 8mm allen key is it easy to do

12-08-05, 02:02 PM	#6
jamesobrady Guest Posts: n/a	Yup...undo the 2(?) bolts holding on the entire plate, turni it slightly until you can get an allen bit and spanner/ratchet +bit holder onto the bolt...loosen,replace...tighten...reassemble! Do people still use allen keys?

12-08-05, 02:15 PM	#7
Carsick Guest Posts: n/a	don't forget that you'll need a pair of needle nose pliers to bend the split pin on the rod connecting to the master cylinder.