micron exhausts. - SV650.org

17-12-06, 05:37 PM

on this sv1000 ive got there is twin micron's (beta) i think, anyway i took the baffles out today and guess what? there just tubes with no real baffle in there

now my question is has someone cut the restricting end off the baffles or is the micron beta can a race can and someone has just fitted these tubes to make it look like there are baffles in?

17-12-06, 05:40 PM

My Remus baffle, fizz's blue flame on his SV and his yoshi on his Gixxer all have baffles that are just pipes nothing more. Not sure how it works but it does.

on yer bike · 17-12-06, 05:40 PM

on a quick google I found...
"Beta - High performance race cans - NOT for road use"

17-12-06, 05:41 PM

Quote:

Originally Posted by e.d.

My Remus baffle, fizz's blue flame on his SV and his yoshi on his Gixxer all have baffles that are just pipes nothing more. Not sure how it works but it does.

i removed the baffles with the engine running and there was no sound diff?

17-12-06, 05:45 PM

Can't explain that, but it definatly made a difference on my Remus, and Fizz says it makes a huge difference on his Blue Flame.

17-12-06, 06:11 PM

i think their prob race cans and someone has done a quick homemade job on them.

17-12-06, 06:28 PM

Not exactly the same thing, but I had a micron can ages ago, the tube (baffle) inside it has holes in it, and was wrapped with some sort of matting a bit like fibreglass only a lot more heat resistant.

Pete

18-12-06, 01:54 PM

For what it's worth my LeoVince exhaust is just a short metal tube with no kind of perforations / baffle etc, and is open at one end but closed at the (internal) end. Looks like a bit of a crude d***do! (If you don't know what one is go ask your mum).
There was VERY LITTTLE difference to the noise with the baffle in or out but it was a slightly "softer" noise with the baffle in.... So I took it out!

18-12-06, 03:00 PM

Quote:

Originally Posted by Carl

open at one end but closed at the (internal) end.

mines open at both ends

just a tube doing nothing

TSM · 18-12-06, 03:11 PM

Ive got a Beta can and pipework, it is not road legal "apparently". It has not markings on it either way, so you "may" pass an MOT.

If you want a baffle, just get one from the Delta can and fit it, or probably nearly every other can manuf and most will just require a hole to be drilled for the bolt/rivet.

17-12-06, 05:37 PM	#1
kwak zzr Guest Posts: n/a	micron exhausts. on this sv1000 ive got there is twin micron's (beta) i think, anyway i took the baffles out today and guess what? there just tubes with no real baffle in there now my question is has someone cut the restricting end off the baffles or is the micron beta can a race can and someone has just fitted these tubes to make it look like there are baffles in?

17-12-06, 05:40 PM	#3
on yer bike Member Join Date: Aug 2006 Location: Edinburgh, Scotland Posts: 869	on a quick google I found... "Beta - High performance race cans - NOT for road use" __________________

18-12-06, 03:11 PM	#10
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Ive got a Beta can and pipework, it is not road legal "apparently". It has not markings on it either way, so you "may" pass an MOT. If you want a baffle, just get one from the Delta can and fit it, or probably nearly every other can manuf and most will just require a hole to be drilled for the bolt/rivet. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Devil or Micron exhausts on a SV 650?	4fold	Exhausts	5	17-01-09 05:03 PM
Micron	croddman	For Sale - SV's and SV related items	8	21-01-08 09:12 AM
micron end can	sfstu	Stuff Wanted	0	29-04-07 01:08 AM
micron exhausts on a sv1000	kwak zzr	Exhausts	4	19-11-06 08:19 PM
Micron	Amanda M	Exhausts	4	05-09-04 10:58 PM

17-12-06, 05:40 PM	#2
diamond Guest Posts: n/a	My Remus baffle, fizz's blue flame on his SV and his yoshi on his Gixxer all have baffles that are just pipes nothing more. Not sure how it works but it does.

17-12-06, 05:45 PM	#5
diamond Guest Posts: n/a	Can't explain that, but it definatly made a difference on my Remus, and Fizz says it makes a huge difference on his Blue Flame.

17-12-06, 06:11 PM	#6
kwak zzr Guest Posts: n/a	i think their prob race cans and someone has done a quick homemade job on them.

17-12-06, 06:28 PM	#7
netsurfer Guest Posts: n/a	Not exactly the same thing, but I had a micron can ages ago, the tube (baffle) inside it has holes in it, and was wrapped with some sort of matting a bit like fibreglass only a lot more heat resistant. Pete

18-12-06, 01:54 PM	#8
Carl Guest Posts: n/a	For what it's worth my LeoVince exhaust is just a short metal tube with no kind of perforations / baffle etc, and is open at one end but closed at the (internal) end. Looks like a bit of a crude d***do! (If you don't know what one is go ask your mum). There was VERY LITTTLE difference to the noise with the baffle in or out but it was a slightly "softer" noise with the baffle in.... So I took it out!