Carb Balancer - SV650.org

TSM · 24-07-05, 08:37 PM

Has anyone ever seen these.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...MakeTrack=true

Sid Squid · 24-07-05, 09:02 PM

Buy these instead, much better, easier to use and more accurate.

You can get a two column version if you're too tight for the full set which will be useable for just about anything* you'll ever own.

You get what you pay for.

*Unless you're planning to buy either a Z13, CBX1000, Benelli Sei, RC211V, Laverda V6 or Guzzi V8, (doubtless others too, but I can't think of any right now).

TSM · 24-07-05, 09:11 PM

Seen thoes before, might get them or i will just wait till i get back from holiday.

Seems like i might not get them done by Viney before my holiday because he is busy with some stuff this gone and next weekend.

With the carbtune kit, does it come with T peices for connection or do you have to remove the vac tubes temporarly?

Viney · 24-07-05, 09:31 PM

You are more than welcome to borrow mine mate, just cant do them for you.

24-07-05, 09:53 PM

Quote:

Originally Posted by TSM

Has anyone ever seen these.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...MakeTrack=true

Yes they're crap - I bought some & they didn't work & I had to complain to PayPal to get my money back after getting a load of abuse from the seller - Don't buy from him, he's a knob of the highest order

25-07-05, 03:07 AM

Just a quick question and didn't mean to hijack the post. A quick question to those who own the the Morgan Carb Tuner. Does it work well and is it worth the money?
Thanks in advance.
Cheers!

TSM · 25-07-05, 08:58 PM

woooa, my carbs were out, major. One was reading 8 and the other over 15 inches.

25-07-05, 09:08 PM

Quote:

Originally Posted by TSM

woooa, my carbs were out, major. One was reading 8 and the other over 15 inches.

Blimey, did mine this weekend for the first time: only 2" Hg between them. Mind you, I had trouble finding two of the four gauges which read the same. The last time I'd used them was 25 years ago...

24-07-05, 08:37 PM	#1
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Carb Balancer Has anyone ever seen these. http://cgi.ebay.co.uk/ws/eBayISAPI.d...MakeTrack=true __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

24-07-05, 09:02 PM	#2
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Buy these instead, much better, easier to use and more accurate. You can get a two column version if you're too tight for the full set which will be useable for just about anything* you'll ever own. You get what you pay for. *Unless you're planning to buy either a Z13, CBX1000, Benelli Sei, RC211V, Laverda V6 or Guzzi V8, (doubtless others too, but I can't think of any right now). __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

24-07-05, 09:11 PM	#3
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Seen thoes before, might get them or i will just wait till i get back from holiday. Seems like i might not get them done by Viney before my holiday because he is busy with some stuff this gone and next weekend. With the carbtune kit, does it come with T peices for connection or do you have to remove the vac tubes temporarly? __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

25-07-05, 08:58 PM	#7
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	woooa, my carbs were out, major. One was reading 8 and the other over 15 inches. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What Carb Balancer	thedonal	Bikes - Talk & Issues	13	21-08-08 05:54 PM
Wheel balancer	flymo	Stuff Wanted	6	25-02-08 09:34 AM
cheap carb balancer wanted.......	Marksv	Stuff Wanted	6	18-05-07 08:08 PM
Carb balancer for twin SU HS4's	Caddy2000	Idle Banter	3	27-04-07 07:37 PM
Is this Carb balancer any good ?	SpankyHam	Bikes - Talk & Issues	3	03-08-06 11:29 AM

24-07-05, 09:31 PM	#4
Viney Member Mega Poster Join Date: Jul 2003 Location: In the shadows to the left Posts: 7,700	You are more than welcome to borrow mine mate, just cant do them for you.

25-07-05, 03:07 AM	#6
a1a Guest Posts: n/a	Just a quick question and didn't mean to hijack the post. A quick question to those who own the the Morgan Carb Tuner. Does it work well and is it worth the money? Thanks in advance. Cheers!