2001 Candy Grand Blue Sv650s Breaking

Breaking our Candy Grand Blue Sv 650. Last seviced at JHS in May 08. Done about 1000 miles since then. Nothing wrong with the bike apart from the problems with the carbs. Never been dropped or crashed since we,ve owned it. Bought with 1100 miles on the clock. We are only the 2nd owners

There are two short vids on this thread so you can see the general condition.

http://forums.sv650.org/showthread.php?t=117620




£250 Frame with V5. Straight, never been involved in any sort of accident.
£200 Forks straight and fitted with preload adjusters.
£350 Purple powdercoated wheels with Braking wave wavy discs, titanium disc bolts fitted with Pilot road 2 Tyres.
£100 Fuel tank. No filler cap. Good. Got a few chips from use.
£75 Instruments. All working. Speedo Showing 27742
£50 NoseCone. Pretty perfect .
£15 left mirror. Scuffed back
£20ea Clip Ons
£10 Pair of Stainless Bar ends
£70 Gixer Radial master cylinder
£50 Lock Set with two Keys, Filler ,Ignition Switch and seat lock
£30 OEM Seats. A couple of small tears.
£10 OEM Gear lever
£30 ea Left and Right Riders Hangers complete with pegs
£10 Powdercoated blue Torque arm. Chipped.
£10 Powdercoated blue rear caliper hanger
£35 Rear caliper
£15 OEM Dog bones the pair
£40 Suspension linkage. Was serviced at JHS recently
£30 Rear subframe. Straight.
£5 OEM Rear light
£30 Seat plastics complete. Worn by boots but polishes up nicely. Cracked where i forgot about the little self tapper, and the black joiner piece is marked when Rentec rack came loose and rubbed against it
£10 Grab Rail
£75 Radiator. The thermo switch doesn't work, therefore the fan doesn't switch on when it should
£30 Rad Fan. Working
£40 ECU under the rear seat.
£100 OEM Front discs the pair. Only done 1,500 miles from new.
________

could you please send me some pics on the powder coated
Pair of rear pillion hangers and pegs. Hangers powdercoated Blue
Powdercoated blue Torque arm. Chipped.
Powdercoated blue rear caliper hanger

PM'd

interested in the seats if you could give me more details

Originally Posted by theshed

interested in the seats if you could give me more details

These were seats we bought whilst ours were off being recovered. They have the tears in them as seen.

Originally Posted by wilky007

could you please send me some pics on the powder coated
Pair of rear pillion hangers and pegs. Hangers powdercoated Blue
Powdercoated blue Torque arm. Chipped.
Powdercoated blue rear caliper hanger

Pic of the hanger and torque arm.

Have you got two sets of the pillion hangers? They look just like the ones I bought from you!

Originally Posted by gavinsky23

Have you got two sets of the pillion hangers? They look just like the ones I bought from you!

Oh my God! You are right Gavin.

Thank you for saving me hours of hunting for long sold pegs.

Profuse apologies to you Wilky 007, but I only have the caliper hanger and torque arm now.

[Dave20046]

Got a straight gearshift lever rod/shaft or rear brake lever?
ta

Originally Posted by Dave20046

Got a straight gearshift lever rod/shaft or rear brake lever?
ta

thinkthe gear lever rod has been sold but might well have a straight brake lever.Need to check though after my earlier gaff.