Are TL 1000 Yokes compatible for Front end swap?

Basically as the title suggests, i'm having real trouble sourcing some SRAD 750 yokes for my K4 750 forks and was just wondering if anyone knows whether TL 1000 yokes will fit, if so which model/years?

Any help much appreciated!!!

Si

[yorkie_chris]

All of them AFAIK

Compatible with the TLS/TLR forks and SRAD axle, obviously will only work with the USD's.

TL mudguard also fits gixxer bits, as do the calipers on the SRAD.

TL triples will not work with 750 forks.

[yorkie_chris]

I stand corrected, can't remember where I heard that though.

What's different?

lower triple bore is 55mm on tl's and 54 on gsxr's.

[TSM]

Originally Posted by zadar

lower triple bore is 55mm on tl's and 54 on gsxr's.

I found that one out, annoying.

For the others, the top yoke is the same though i think, the TL forks are also longer.

K guys thanks for the help!

[yorkie_chris]

Originally Posted by TSM

I found that one out, annoying.

For the others, the top yoke is the same though i think, the TL forks are also longer.

Could be useful to know, depending on how you want the geometry to end up.

Could you get the extra mm machined out? i.e is spacing and offset the same?

[TSM]

Originally Posted by yorkie_chris

Could be useful to know, depending on how you want the geometry to end up.

Could you get the extra mm machined out? i.e is spacing and offset the same?

err no, the offset is fine i think, just the bottom yoke has larger holes, if you want TL forks use TL yokes, the same said for srad stuff.