sv1000 throttle bodies - SV650.org

Gaz.sv650 · 16-08-14, 10:03 AM

As title pair of good condition sv1000 throttle bodies
I had these fitted to my old k6 sv650 and they worked perfectly
£50 posted
I can sort out some pictures if needed
Thanks

07-07-17, 10:39 AM

Hi Gaz,

I am looking to do this mod on my race bike and was wondering where did you get the lower rubbers from or can you fit the sv1000 throttle bodies to the 650 lower rubbers?

Cheers

Vince

Gaz.sv650 · 07-07-17, 02:23 PM

I managed to work the sv1000 lower rubbers, be prepared it's not a simple job you will need to make a set of adapters.

11-07-17, 12:29 PM

What power gains did you get from these? I have a set sitting and wondering what pros they will have

curlylee · 11-07-17, 04:52 PM

Just had mine bored out to 42mm ,Howe fast performance facebook and gav is on eBay £130 , jhs racing use him . Top bloke aswell

12-07-17, 08:04 AM

the SV1000 TB's are 52/54mm I think.. For the cost to send them off to get bored, its seems the cheaper option to fit the SV1000's, but whats the Pro's, head mixed things... Good and bad

12-07-17, 03:25 PM

We are getting 82BHP with standard engine, ram air, thinner head gasket and standard TB less secondary butterlies. CU at EF.

16-08-14, 10:03 AM	#1
Gaz.sv650 Member Join Date: Feb 2011 Location: worcester Posts: 361	sv1000 throttle bodies As title pair of good condition sv1000 throttle bodies I had these fitted to my old k6 sv650 and they worked perfectly £50 posted I can sort out some pictures if needed Thanks

07-07-17, 10:39 AM	#2
akavintz Guest Posts: n/a	Re: sv1000 throttle bodies Hi Gaz, I am looking to do this mod on my race bike and was wondering where did you get the lower rubbers from or can you fit the sv1000 throttle bodies to the 650 lower rubbers? Cheers Vince

07-07-17, 02:23 PM	#3
Gaz.sv650 Member Join Date: Feb 2011 Location: worcester Posts: 361	Re: sv1000 throttle bodies I managed to work the sv1000 lower rubbers, be prepared it's not a simple job you will need to make a set of adapters.

11-07-17, 12:29 PM	#4
G-Russ Guest Posts: n/a	Re: sv1000 throttle bodies What power gains did you get from these? I have a set sitting and wondering what pros they will have

11-07-17, 04:52 PM	#5
curlylee Member Join Date: Oct 2009 Location: sheffield Posts: 402	Re: sv1000 throttle bodies Just had mine bored out to 42mm ,Howe fast performance facebook and gav is on eBay £130 , jhs racing use him . Top bloke aswell

12-07-17, 08:04 AM	#6
G-Russ Guest Posts: n/a	Re: sv1000 throttle bodies the SV1000 TB's are 52/54mm I think.. For the cost to send them off to get bored, its seems the cheaper option to fit the SV1000's, but whats the Pro's, head mixed things... Good and bad

12-07-17, 03:25 PM	#7
N1xxl Guest Posts: n/a	Re: sv1000 throttle bodies We are getting 82BHP with standard engine, ram air, thinner head gasket and standard TB less secondary butterlies. CU at EF.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New (to me) throttle bodies. What are these?	LewSpeight	SV Talk, Tuning & Tweaking	30	15-10-13 03:04 PM
throttle bodies 07+	svsam	Stuff Wanted	0	29-04-12 06:59 PM
SV1000 throttle bodies on a 650?	Weeble	SV Talk, Tuning & Tweaking	33	11-12-09 11:04 PM
ANOTHER set of throttle bodies..? Please no...	Bluewolf	SV Talk, Tuning & Tweaking	6	08-06-09 09:28 PM
Throttle bodies???On a Raptor	dizzyblonde	SV Talk, Tuning & Tweaking	8	21-06-07 02:13 PM