SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
02-04-19, 07:12 PM | #1 |
Member
Join Date: Nov 2009
Posts: 112
|
Fork tube bottom bush question
So im replacing my pitted stanchions with new ones and im fine with the strip and rebuild however it states that "if removing bottom bush" new ones should be fitted.
So, my question is. if i purchase new bush's how do i fit them to a new tube, is it the case of simply stretching the gap with a screwdriver and sliding it on and into the recess, if so why cant i just re use the old bush's ? or is there a more specific method of fitting? |
02-04-19, 10:02 PM | #2 |
Member
Mega Poster
Join Date: Dec 2015
Location: Bristol
Posts: 1,200
|
Re: Fork tube bottom bush question
The lower outer ones will just spread slightly and clip around the stanchion. The upper ones need to be driven into the top of the fork lowers with the stanchions etc in place and can sometimes get a bit deformed from being pulled out or driven in multiple times. The lower ones are very easy to put in place.
Any work like that and I'd take it as an opportunity to put in new bushes and fork seals while it's all apart, unless it's already been done recently?
__________________
>>> ? <<< Past: Street Triple 765rs, DRZ400s,GSXR1000 K9, VFR800 A8, ZX6R 636 2006, CRF250L, GSXR750 K7, VFR800 A7, GSXR750 L3, Street Triple 675R, MT09 Tracer, SV650s K8, CB250rsd, YBR125... |
02-04-19, 10:03 PM | #3 |
Member
Mega Poster
Join Date: Dec 2015
Location: Bristol
Posts: 1,200
|
Re: Fork tube bottom bush question
+ If you do get replacement bushes then avoid the Pyramid ones on eBay. I bought them and had to send them back as they were totally the wrong size, no way they were going to fit. They denied that they were wrong but accepted the return anyway.
I think I go them from Wemoto in the end.
__________________
>>> ? <<< Past: Street Triple 765rs, DRZ400s,GSXR1000 K9, VFR800 A8, ZX6R 636 2006, CRF250L, GSXR750 K7, VFR800 A7, GSXR750 L3, Street Triple 675R, MT09 Tracer, SV650s K8, CB250rsd, YBR125... |
03-04-19, 03:03 PM | #4 |
Member
Join Date: Nov 2009
Posts: 112
|
Re: Fork tube bottom bush question
Cool, i was just worried that id need a special tool or something, and yeah i usually get my stuff from wemoto too, thats where the stanchions came from but i couldnt find the bush's so iv ordered them from MSP (motorcycle spare parts) seems like a pretty good site and they seem to be a bit better priced than Robinsons for OEM stuff
|
03-04-19, 06:41 PM | #5 |
Member
Mega Poster
Join Date: Dec 2015
Location: Bristol
Posts: 1,200
|
Re: Fork tube bottom bush question
Bottom ones need no special tool. Upper ones can be driven in with the right bearing driver, or the plastic pipe and u-clips cheap method.
__________________
>>> ? <<< Past: Street Triple 765rs, DRZ400s,GSXR1000 K9, VFR800 A8, ZX6R 636 2006, CRF250L, GSXR750 K7, VFR800 A7, GSXR750 L3, Street Triple 675R, MT09 Tracer, SV650s K8, CB250rsd, YBR125... |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fork Bush | Stilo | SV Talk, Tuning & Tweaking | 3 | 19-03-17 09:07 PM |
Perfect suspension fork bush and seal fitting tool. | beabert | SV Talk, Tuning & Tweaking | 6 | 31-05-13 03:01 PM |
i need a fork tube please | GOZA | Stuff Wanted | 21 | 08-07-10 10:59 PM |
front fork bush question | DaveW_42 | SV Talk, Tuning & Tweaking | 3 | 13-09-09 06:26 PM |
Fork seals and bush prices - WT*? | sam anon | SV Talk, Tuning & Tweaking | 5 | 30-01-09 02:22 PM |