pointy bits for sale mostly k3

[skeetly]

Well the SV goes on saturday so I'm flogging off the bits I have aquired.

Genuine suzuki lower fairings that I bought from amplimator just a few weeks ago as shown in this thread: http://forums.sv650.org/showthread.php?t=128446

Metallic Thunder Grey (YLF)



All I have done is taken them out of the box and looked at them, the fitting kit is included.

Asking the same as Amp £175.00 plus postage.

R&G crash bungs for fully faired k3. Brand new. Never been out of the box. SOLD



£80 plus postage

Brand new clutch and brake lever. Pattern parts for k3 £20 plus postage



Original sv650 bar end weight including screw. small scuff. £10 plus
postage



Original snow shovel for k3 £15 plus postage



Original chain guard k3 £5



Foot rest hanger for k4 gear change side (I think !) £15



Footrest hanger for k3 brake lever side (I think) £15 plus postage



Footrest k3 gearchange side £15 (bit worn) (NOT brake side doh..)



Tool for tensioning steering head bearings on k3 £20 plus postage

STEERING STEM HEAD BEARING CASTLE NUT TOOL, GSXR1000/HAYABUSA/SV & TL 1000 & ANY OTHER SUZUKI USING THE 6 SLOT NUT.
THIS TOOL IS THE SAME AS THE SUZUKI TOOL. PART No 09940-14911 / 09940-14960
THE TWO PART SUZUKI TOOL FOR UNDOING / TIGHTENING THE STEERING HEAD BEARING CASTLE NUT COSTS £80 + VAT = £94.00
THIS ONE IS MADE FROM STAINLESS STEEL , FOR REMOVAL,& RE TORQUEING THE STEERING BEARINGS
THIS TOOL HAS A FEMALE 1/2 INCH SQUARE DRIVE (LIKE A SOCKET) SO YOU CAN EASILY TIGHTEN / UNDO.WITH A 1/2 INCH EXTENSION BAR, RATCHET OR A TORQUE WRENCH TO SET TO THE CORRECT TORQUE.




Normal seat for k4 brand new delivered in error from george white £20
(stone fly not included)





Lowered seat for k3 was on my bike when i bought it and in good condition
£15 SOLD







All the above will need to have postage worked out for them or maybe we can do deliverys by 'meet' if close enough.

Cheers.

[skeetly]

I'll it until the end of next week and then its off to ebay.

How much lower is the lowered seat than a normal seat

[skeetly]

Its about an inch.

Well it actually works out as more than that because is sort of squishes down a lot more.
I felt a big difference between it and the proper seat.
I swapped the dog bones first and it took me a while to find a new seat.

I'll deffinately have the lowered K3 seat if Newts does'nt want it

cheers

mick

[skeetly]

It's sold I think guys. Pm'd earlier.

Hi, Im interested in the left hand side foot bracket, gear side.
I also am interested in the fairings if they are the right coulor?
does metalic thunder grey just look like black?
What is the paint code? and it the pant code written anywhere?

What is your best price on the lower fairings?
Im in Ireland so postage to here is going to cost me a fortune, Please be kind, Im poor.

Thanks, John.

[skeetly]

Originally Posted by skapegoat

Hi, Im interested in the left hand side foot bracket, gear side.
I also am interested in the fairings if they are the right coulor?
does metalic thunder grey just look like black?
What is the paint code? and it the pant code written anywhere?

What is your best price on the lower fairings?
Im in Ireland so postage to here is going to cost me a fortune, Please be kind, Im poor.

Thanks, John.

You have pm.

The code is up there: Metallic Thunder Grey (YLF)
They aren't black.

Left side bracket only so, can you check the postage to Ireland?
Take paypal?

[skeetly]

Just giving this a bump as it will be up a bit longer. Wont find time to sort ebay out this week.
Still have the following:

Fairing lowers
Clutch and brake levers
Bar end
K3 'snow shovel' original rear mudguard/numberplate holder
K4 gear change side peg hanger
K3 brake lever side peg hanger
K3 gearchange foot peg
K3 Tool for tensioning steering head bearings
K4 seat