ignition advancer

Hi all, raced at Silverstone at weekend with bemsee , done reasonably well with power limitation, its only showing 62bhp on the dyno.
was thinking about fitting an ignition advancer before Brands, has anyone else tried this or are there any other cheapish ways of boosting the power ?
cheers, Stevo
rookie minitwin 67

It's illegal in Minitwins I'm afraid Steve.....

cheers for that, saved me money and from getting in trouble with the club.
any other ideas?

[yorkie_chris]

Slot the pickup holes if you want to advance it.
But I don't think that will give you any power.

What other mods to bike?

Has the fueling been setup properly?. If not then its well worth some time on a dyno. You can use the standard needles and then loose jets to jet the bike rather than a dynojet kit.
Failing that injected cams are a worthy investment. Every set we have fitted and then setup have pulled the carbed bikes upto where the injected bikes are power and torque wise.

Is the Dynojet kit not that good on the SV, would it explain my top end misfire?

Thanks for any info

Cheers

AJ

Originally Posted by adjblade

Is the Dynojet kit not that good on the SV, would it explain my top end misfire?

Thanks for any info

Cheers

AJ

Nothing wrong with them at all BUT you need to ensure they are fitted in conjunction with runs on a dyno. If you fit the kit as they recommend then you could be way off. Also they work out more costly jetting with the kit than it does with loose jets.

Looks like I need to book some dyno time with you for my carbed bike if possible, I did fit the kit to the recommended settings. I am based near Worthing so getting the bike up to is not really a problem, do you do Saturdays?

Thanks for the advice

AJ

Yup we do Saturdays but we are booking now from Saturday 10th July for a Saturday dyno with Steve. Weekdays are a little easier diary wise. Worthing is only about 40mins on a clear run. Can do while you wait if needs be too.

Ok, thanks, no panic, my last race of the year will be at Brands in July on my injected bike so no panic at the moment, i will give you a call sometime soon after to get it set up on the dyno.

Cheers

AJ # 54
Sponsored by Worthing Motorcycles