Curvy lightened Flywheel assembly

[millemille]

Originally Posted by CLARKYsv

I live on Canvey. Fitting service would take how long? Do I have to drop the bike off or can it be done while I wait etc?

If all goes well fitment takes about 45 mins.

Yeah, you can stand there and watch if you like....

Mike

[CLARKYsv]

Once the bike has been Mot'd I shall be down to you for the Full Padoodle.

Then its the Cam swap for me and et voila... bike done haha

[jambo]

Originally Posted by CLARKYsv

et voila... bike done haha

A bike is never really finished though is it?

Jambo

[CLARKYsv]

Originally Posted by jambo

A bike is never really finished though is it?

Jambo

With a GSXR front end
Pointy Nose
Vapor clocks
Gsxr1000 tail
Dual pipes
Zx10r shock
Gsxr 600 rear wheel

..... I don't want to do much more... time to ride the baby haha

[Davemurphy007]

Looking forward to getting mine fitted in the morning, will report back on how it feels.

[Bibio]

might be interested in one of these over the winter.

if you have access to a mill have you thought about making radial brake legs/brackets. the bracket would bolt onto the original fork leg lugs but allow you to use radial brakes. i think a lot of people would be very interested in that.

[millemille]

Originally Posted by Bibio

might be interested in one of these over the winter.

if you have access to a mill have you thought about making radial brake legs/brackets. the bracket would bolt onto the original fork leg lugs but allow you to use radial brakes. i think a lot of people would be very interested in that.

That's an interesting idea, thanks, and we'll have a think about it...

[millemille]

I won't put words into Dave's mouth, but I think he's quite happy with his new flywheel.....

[millemille]

Thanks very much to everyone who's bought one of the flywheels, hopefully all of you who've got one fitted are happy with the performance and handling improvements....

We're changing slightly how we deal with the flywheel orders from now on.

Of the 8 flywheels we've received in exchange for lightened ones, 2 of them are not fit for further use. Obviously the customers weren't to know that and supplied them in good faith so we'll bear the cost, but we can't afford to carry on with that attrition rate.

We also thought that all flywheels were interchangable, within the same model type, as the part numbers are all the same. However this isn't the case - there appears to be an occasional bike where the flywheel and crank are matched due to tolerance build up of the tapers and you can't fit another flywheel. Many thanks to toshy595 for his patience and understanding whilst we sort this out on his bike.

So from now on, rather than supplying flywheel assemblies on an exchange basis, we will machine your own flywheel and return it you. We can turn round a loose flywheel in 7-10 days absolute max, normally quicker. If you want it fitted we can machine it whilst you wait if you bring your bike to our unit in Basildon.

No worries, as an engineer too, I empathise with your project completely, as much as I wanted to be embracing the performance upgrade, patience is a virtue. & I believe to marry the same parts lightened, to be a much more efficient & reliable way forward in your venture. Will liaise next week to arrange the upgrade👍


Sent from my iPhone using Tapatalk