The All New Megathread - Page 167 - SV650.org

littleoldman2 · 24-10-18, 08:30 PM

What time you working till then Andy.

garynortheast · 24-10-18, 08:39 PM

Quote:

Originally Posted by littleoldman2

I'm struggling with bikes atm as the only bike I'm strong enough to ride and is road legal is the Van Van. the Striple's chain holed the crankcase when the chain split in Scotland a few weeks ago so needs a full strip, this of course is taking me a long time. Hopefully be back on it in early spring.

Bugger!! Didn't realise it had done so much damage!

littleoldman2 · 24-10-18, 08:47 PM

Aye it's only about half an inch but I dont know if there's any dirt or dirty casing in the sump. Bottom casing and I know a very good Ali welder, so it's really just a time problem. I stopped the engine straight away so I'm sure that's OK.

garynortheast · 24-10-18, 09:03 PM

What a pain in the arris though!

littleoldman2 · 24-10-18, 09:11 PM

I've just been chatting to Mrs LOM and she said mid sentence "it was my fault". Thirty Three years and I've never heard that one. Still no doubt it will change.

andrewsmith · 24-10-18, 09:25 PM

Quote:

Originally Posted by littleoldman2

What time you working till then Andy.

About 12 last job is the MiL from the airport

Quote:

Originally Posted by littleoldman2

I've just been chatting to Mrs LOM and she said mid sentence "it was my fault". Thirty Three years and I've never heard that one. Still no doubt it will change.

That's a new one. So a proper job on the motor

Sent from my PRA-LX1 using Tapatalk

littleoldman2 · 24-10-18, 10:21 PM

yep, going to take me a while. The bloke who owns the welders next to my workspace is a wonderfull ali welder and has done a few jobs for me. So "just" need to get it into bits.

punyXpress · 25-10-18, 08:27 AM

"it was my fault"

Isn't that written into a bloke's wedding vows ?

btw: Good Morning All

Sir Trev · 25-10-18, 10:03 AM

Morning all.

Decided today was a good day to take Hugh for a (probably) final blast before the salt starts to appear down here. Was heading for a bike shop caff when I remember I was meant to be staying in for a parcel delivery. Ooops. Ended up as a nice circuit of 30 miles instead of the planned 80 but hey ho. No card through the door so I got away with it. Yay!!

Brimmed the tank ready for layover just before I got home and went to add some ProFST as a stabiliser when I was shocked to see fuel almost over the top of the filler neck... It must be very cold in the underground tank at the filling station and of course it had warmed up a lot sitting over my warm engine and it expanded. More than I thought it would! Good job I filled up on the side stand and I use the centre stand in the garage. Should be fine once it cools down.

Bibio · 25-10-18, 02:01 PM

wish i could go out on the bike

roll on the spring

24-10-18, 08:30 PM	#1661
littleoldman2 Member Mega Poster Join Date: Jun 2011 Location: Cramlington Northumberland where we are truely blessed Posts: 1,385	Re: The All new Reeder Megathread What time you working till then Andy. __________________ used to be littleoldman but forgot password due to failing memory

24-10-18, 08:47 PM	#1663
littleoldman2 Member Mega Poster Join Date: Jun 2011 Location: Cramlington Northumberland where we are truely blessed Posts: 1,385	Re: The All new Reeder Megathread Aye it's only about half an inch but I dont know if there's any dirt or dirty casing in the sump. Bottom casing and I know a very good Ali welder, so it's really just a time problem. I stopped the engine straight away so I'm sure that's OK. __________________ used to be littleoldman but forgot password due to failing memory

24-10-18, 09:03 PM	#1664
garynortheast Member Mega Poster Join Date: Mar 2010 Location: Mid Wales Posts: 2,487	Re: The All new Reeder Megathread What a pain in the arris though! __________________ http://www.teulu-cymru.org/cartref.html https://teulu.bandcamp.com/releases

24-10-18, 09:11 PM	#1665
littleoldman2 Member Mega Poster Join Date: Jun 2011 Location: Cramlington Northumberland where we are truely blessed Posts: 1,385	Re: The All new Reeder Megathread I've just been chatting to Mrs LOM and she said mid sentence "it was my fault". Thirty Three years and I've never heard that one. Still no doubt it will change. __________________ used to be littleoldman but forgot password due to failing memory

24-10-18, 10:21 PM	#1667
littleoldman2 Member Mega Poster Join Date: Jun 2011 Location: Cramlington Northumberland where we are truely blessed Posts: 1,385	Re: The All new Reeder Megathread yep, going to take me a while. The bloke who owns the welders next to my workspace is a wonderfull ali welder and has done a few jobs for me. So "just" need to get it into bits. __________________ used to be littleoldman but forgot password due to failing memory

25-10-18, 08:27 AM	#1668
punyXpress Member Mega Poster Join Date: Feb 2008 Location: Riding, North Posts: 2,664	Re: The All new Reeder Megathread "it was my fault" Isn't that written into a bloke's wedding vows ? btw: Good Morning All __________________ Was: K2 naked in rapid yellow - gone to a better? place Now: Street Triple R

25-10-18, 10:03 AM	#1669
Sir Trev Member Mega Poster Join Date: Jun 2005 Location: High Wycombe, where the chair factories used to be Posts: 1,440	Re: The All new Reeder Megathread Morning all. Decided today was a good day to take Hugh for a (probably) final blast before the salt starts to appear down here. Was heading for a bike shop caff when I remember I was meant to be staying in for a parcel delivery. Ooops. Ended up as a nice circuit of 30 miles instead of the planned 80 but hey ho. No card through the door so I got away with it. Yay!! Brimmed the tank ready for layover just before I got home and went to add some ProFST as a stabiliser when I was shocked to see fuel almost over the top of the filler neck... It must be very cold in the underground tank at the filling station and of course it had warmed up a lot sitting over my warm engine and it expanded. More than I thought it would! Good job I filled up on the side stand and I use the centre stand in the garage. Should be fine once it cools down. __________________ We are the Goon Squad and we're coming to town, BEEP BEEP!

25-10-18, 02:01 PM	#1670
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,540	Re: The All new Reeder Megathread wish i could go out on the bike roll on the spring

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RIP Andrew Reeder (Reeder)	alextg	East Anglian Revolution	15	01-06-14 07:57 PM
Sad News RIP Reeder	dizzyblonde	Idle Banter	265	31-05-14 09:18 PM
fao: Reeder...	speedplay	Idle Banter	60	23-03-12 12:32 PM