SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
23-05-18, 04:53 PM | #21 | |
Guest
Posts: n/a
|
Re: SV650AL7 chain and sprockets kit
Quote:
|
|
20-09-18, 08:56 PM | #22 |
Junior Member
Join Date: Feb 2017
Posts: 7
|
Re: SV650AL7 chain and sprockets kit
Hi, what combo did you got in the end ? I`m only replacing the front sprocket now at 13k.
Can`t find anywhere front sprockets torque spec for the AL7. Cheers |
21-09-18, 08:13 AM | #23 |
Member
Mega Poster
Join Date: Feb 2017
Location: JAMOADR(1999 Curvy) 36,000 miles
Posts: 1,429
|
Re: SV650AL7 chain and sprockets kit
I think that's what I used when I replaced mine last year.
__________________
"Stultus est sicut stultus facit" |
21-09-18, 06:16 PM | #24 |
Junior Member
Join Date: Feb 2017
Posts: 7
|
Re: SV650AL7 chain and sprockets kit
Thanks a lot lads. Job`s done. It`s not in my L7 user manual. ( `address to your dealer if sprockets are used`...)
145 Nm it`s a lot; i nearly tipped the bike of the rear stand. Cheers. |
22-09-18, 10:24 AM | #25 |
Member
Mega Poster
Join Date: Feb 2017
Location: JAMOADR(1999 Curvy) 36,000 miles
Posts: 1,429
|
Re: SV650AL7 chain and sprockets kit
Something I've not seen mentioned very often if at all is that some Rear sprockets are flat and symmetrical but the one I fitted and the one that came off mine are not.They have to be fitted with the Maker's,"Ident" parts number etc facing outwards otherwise the chain presents the wrong angle to the front sprocket.
Also I never trust the adjuster markers,at least on older machines,so always check and set mine using a metal tape and the distances between the Swinging arm bolt centre and the centre of the Rear wheel axle. I've only got about 6,000 miles on this set but only adjusted it once and then probably less than a 0.2mm.I use a combination of 80w90 Hypoid gear oil and Mso2 as a lube.I'm not a,"Throttle and Brake" rider preferring to ride smooth but fast and keep my gear changes as smooth as I can both throttling up and down and match engine speeds when coming down so as not to chunk the chain and gearbox etc.
__________________
"Stultus est sicut stultus facit" |
22-09-18, 02:27 PM | #26 |
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,540
|
Re: SV650AL7 chain and sprockets kit
tight enough is good enough as it has a locking washer. i never use a torque wrench on used nuts/bolts.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Scottoiler and SV650AL7 questions | Talking Heads | SV Talk, Tuning & Tweaking | 8 | 10-02-17 09:34 PM |
Chain and sprockets | bobbleheadbarne | SV Talk, Tuning & Tweaking | 11 | 18-02-15 10:09 PM |
New chain and Sprockets. | ThEGr33k | Bikes - Talk & Issues | 19 | 21-08-08 11:15 AM |
Chain and Sprockets where to get them? | custard | SV Talk, Tuning & Tweaking | 13 | 01-07-08 04:58 PM |
New chain and sprockets | CDM | SV Talk, Tuning & Tweaking | 20 | 05-07-07 11:25 AM |