SV650.org - SV650 & Gladius 650 Forum



SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 08-09-08, 05:32 PM   #1
Pam
Guest
 
Posts: n/a
Default re-packing an exhaust?

I have a gold titanium oval exhaust 2 years old, I think it needs re-packing (it is louder than normal)I have checked for blow back, baffle is good also. Is it something I could repair myself (with some help?) or should I buy a new exhaust?
  Reply With Quote
Old 08-09-08, 05:40 PM   #2
dirtydog
Knob faced knobster
Mega Poster
 
dirtydog's Avatar
 
Join Date: Jan 2005
Location: Haslemere
Posts: 5,419
Default Re: re-packing an exhaust?

They're normally easy enough to re-pack, most cans are rivetted together so you'll need a rivetter to put it back together
__________________
2001 SV650 in shimmerin green, Not broken anymore
dirtydog is offline   Reply With Quote
Old 08-09-08, 05:43 PM   #3
Stig
Guest
 
Posts: n/a
Default Re: re-packing an exhaust?

You could but that tends to make them quieter. Not for me thanks.
  Reply With Quote
Old 08-09-08, 05:47 PM   #4
Pam
Guest
 
Posts: n/a
Default Re: re-packing an exhaust?

I have no baffle in mine Sounds ace!! But i am worried it could cause damage/problems if I do not re-pack?? If not then i will leave it as it is, advice please? The louder it is the better..
  Reply With Quote
Old 08-09-08, 05:59 PM   #5
joshmac
Guest
 
Posts: n/a
Default Re: re-packing an exhaust?

Quote:
Originally Posted by Pam View Post
I have no baffle in mine Sounds ace!! But i am worried it could cause damage/problems if I do not re-pack?? If not then i will leave it as it is, advice please? The louder it is the better..
I would seriously doubt that running an exhaust with no baffles would damage the bike, seing the number of people who ride without them (myself being one of course!! )
IMO it sounds SO much better with it out







Disclamer: I take no responsibility for damage to your bike
  Reply With Quote
Old 08-09-08, 06:03 PM   #6
Stu
Trinity
Mega Poster
 
Stu's Avatar
 
Join Date: Jun 2006
Location: Guildford
Posts: 8,027
Default Re: re-packing an exhaust?

Quote:
Originally Posted by joshmac View Post
I would seriously doubt that running an exhaust with no baffles would damage the bike, seing the number of people who ride without them (myself being one of course!! )
IMO it sounds SO much better with it out
clamer: I take no responsibility for damage to your bike
Packing is different from a baffle Josh.
Spiderman's run his for long enough without packing. As long as louder the better i.e. no trackdays, then should be fine.
Stu is offline   Reply With Quote
Old 08-09-08, 06:05 PM   #7
Pam
Guest
 
Posts: n/a
Default Re: re-packing an exhaust?

I am not bothered about the baffle, it's the packing?
  Reply With Quote
Old 08-09-08, 06:06 PM   #8
joshmac
Guest
 
Posts: n/a
Default Re: re-packing an exhaust?

Quote:
Originally Posted by Stu View Post
Packing is different from a baffle Josh.
Spiderman's run his for long enough without packing. As long as louder the better i.e. no trackdays, then should be fine.
*scurries off to corner*
  Reply With Quote
Old 08-09-08, 06:09 PM   #9
joshmac
Guest
 
Posts: n/a
Default Re: re-packing an exhaust?

Quote:
Originally Posted by Pam View Post
I am not bothered about the baffle, it's the packing?
Ignore me, twhat happens when I don't pay attention and only get 3 hours sleep
  Reply With Quote
Old 08-09-08, 06:34 PM   #10
yorkie_chris
Noisy Git
Mega Poster
 
yorkie_chris's Avatar
 
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
Default Re: re-packing an exhaust?

Right then...

2 years makes no difference, how many miles has it done? The original packing in fuel cans tends to last very well.

No packing in an exhaust does not do much harm, it allows the gasses to "rattle round" the can (resonate) which can give all sorts of wierd back pressure, it is not conducive to making good power, probably not worth more than 1bhp though!

On a carbon fibre can the repeated battering of a twin or big singles exhaust pulses can stress the carbon and crack it, not an issue on a metal can or one that's just carbon cosmetic over a sleeve.

Repacking a can is a right pain in the rse, the end caps are a very tight fit and a pain to get out, and to refit. It can be done, all you need is a small drill to remove rivets, some more rivets and a rivet gun (5 quid) to put it back together. Get a sheet of packing off the net, wrap the perforated tube many times then safety wire it round tight.

Or just send it off to fuel and let them do it, it's not too expensive.

Either way, don't worry about it, and if you do, then you don't need to buy a new exhaust.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat
yorkie_chris is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
exhaust packing and rivets Lucas SV Talk, Tuning & Tweaking 2 24-10-08 10:45 AM
Packing... northwind 2008 Annual Rideout 34 07-07-08 10:34 PM
Exhaust Glass Packing Question Torn-Thorax SV Talk, Tuning & Tweaking 11 07-05-07 06:17 PM
Exhaust Packing - purchase site recommendations pls? Demonz SV Talk, Tuning & Tweaking 2 08-12-06 11:33 AM
Where can i get some exhaust packing? svrash Bikes - Talk & Issues 6 15-06-06 09:59 PM


All times are GMT. The time now is 11:25 AM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.