Banjo Switch Size - SV650.org

bikeguy · 09-03-20, 02:31 AM

Neeed Help on knowing which size banjo switch needed for my SV650s K9 model (09)

1mm or 1.25mm???

Looked everywhere and cant find any information on it.

admin · 09-03-20, 07:52 AM

Not sure what you mean by banjo switch.

bikeguy · 09-03-20, 08:52 AM

For the rear brake switch. Instead of coil and spring. It’s a pressure switch I think for the brake light.

If that helps at all.

admin · 09-03-20, 09:20 AM

My bike was older and I had the old style switch, the spring and plunger type. I'm sure someone on here with a later model can help.

Sent from my Moto G (5) using Tapatalk

Chris_SVS · 09-03-20, 09:43 AM

Master cylinders F+R are 1.0 the calipers are 1.25 both M10

Seeker · 09-03-20, 09:57 AM

Is it non standard because the parts fiche shows it as a mechanical switch:
https://www.fowlersparts.co.uk/parts...s-sv650a-k8-k9
(part #17)

My 2016 AL7 also has a mechanical switch

Chris_SVS · 09-03-20, 10:04 AM

A pressure switch like that would be fairly common on offroad stuff or custom builds. It's definitely not standard, but also why not?

Would be cheaper than replacing the M/C

09-03-20, 07:52 AM	#2
admin John T Mega Poster Join Date: May 2003 Location: Shrewsbury, Shrops, UK Posts: 2,455	Re: Banjo Switch Size Not sure what you mean by banjo switch. __________________ Admin for this forum and the main site. John@sv650.org

09-03-20, 08:52 AM	#3
bikeguy Junior Member Join Date: Mar 2020 Posts: 2	Re: Banjo Switch Size For the rear brake switch. Instead of coil and spring. It’s a pressure switch I think for the brake light. If that helps at all.

09-03-20, 09:20 AM	#4
admin John T Mega Poster Join Date: May 2003 Location: Shrewsbury, Shrops, UK Posts: 2,455	Re: Banjo Switch Size My bike was older and I had the old style switch, the spring and plunger type. I'm sure someone on here with a later model can help. Sent from my Moto G (5) using Tapatalk __________________ Admin for this forum and the main site. John@sv650.org

09-03-20, 09:43 AM	#5
Chris_SVS Member Join Date: May 2017 Location: Northern Ireland Posts: 511	Re: Banjo Switch Size Master cylinders F+R are 1.0 the calipers are 1.25 both M10

09-03-20, 09:57 AM	#6
Seeker Member Mega Poster Join Date: Jun 2016 Location: NE Lincs Posts: 1,069	Re: Banjo Switch Size Is it non standard because the parts fiche shows it as a mechanical switch: https://www.fowlersparts.co.uk/parts...s-sv650a-k8-k9 (part #17) My 2016 AL7 also has a mechanical switch __________________ 2016 SV650AL7 2023 GSX-8S

09-03-20, 02:31 AM	#1
bikeguy Junior Member Join Date: Mar 2020 Posts: 2	Banjo Switch Size Neeed Help on knowing which size banjo switch needed for my SV650s K9 model (09) 1mm or 1.25mm??? Looked everywhere and cant find any information on it.

09-03-20, 10:04 AM	#7
Chris_SVS Member Join Date: May 2017 Location: Northern Ireland Posts: 511	Re: Banjo Switch Size A pressure switch like that would be fairly common on offroad stuff or custom builds. It's definitely not standard, but also why not? Would be cheaper than replacing the M/C

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Curvy banjo bolt thread size?	froymot	SV Talk, Tuning & Tweaking	3	25-03-14 06:38 PM
rear brake banjo size	barwel1992	SV Talk, Tuning & Tweaking	8	13-12-09 12:12 AM
Rear Banjo Bolt Size	Sideshow#36	SV Talk, Tuning & Tweaking	2	06-07-09 10:31 AM
Rear M/C Banjo size, 1.0 or 1.25	Ter	SV Talk, Tuning & Tweaking	5	08-11-06 12:34 AM
What size is the banjo for the rear master cylinder?	northwind	SV Talk, Tuning & Tweaking	11	27-04-06 11:08 PM