SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
09-03-20, 02:31 AM | #1 |
Junior Member
Join Date: Mar 2020
Posts: 2
|
Banjo Switch Size
Neeed Help on knowing which size banjo switch needed for my SV650s K9 model (09)
1mm or 1.25mm??? Looked everywhere and cant find any information on it. |
09-03-20, 07:52 AM | #2 |
John T
Mega Poster
Join Date: May 2003
Location: Shrewsbury, Shrops, UK
Posts: 2,455
|
Re: Banjo Switch Size
Not sure what you mean by banjo switch.
__________________
Admin for this forum and the main site. John@sv650.org |
09-03-20, 08:52 AM | #3 |
Junior Member
Join Date: Mar 2020
Posts: 2
|
Re: Banjo Switch Size
For the rear brake switch. Instead of coil and spring. It’s a pressure switch I think for the brake light.
If that helps at all. |
09-03-20, 09:20 AM | #4 |
John T
Mega Poster
Join Date: May 2003
Location: Shrewsbury, Shrops, UK
Posts: 2,455
|
Re: Banjo Switch Size
My bike was older and I had the old style switch, the spring and plunger type. I'm sure someone on here with a later model can help.
Sent from my Moto G (5) using Tapatalk
__________________
Admin for this forum and the main site. John@sv650.org |
09-03-20, 09:43 AM | #5 |
Member
Join Date: May 2017
Location: Northern Ireland
Posts: 511
|
Re: Banjo Switch Size
Master cylinders F+R are 1.0 the calipers are 1.25 both M10
|
09-03-20, 09:57 AM | #6 |
Member
Mega Poster
Join Date: Jun 2016
Location: NE Lincs
Posts: 1,069
|
Re: Banjo Switch Size
Is it non standard because the parts fiche shows it as a mechanical switch:
https://www.fowlersparts.co.uk/parts...s-sv650a-k8-k9 (part #17) My 2016 AL7 also has a mechanical switch
__________________
2016 SV650AL7 2023 GSX-8S |
09-03-20, 10:04 AM | #7 |
Member
Join Date: May 2017
Location: Northern Ireland
Posts: 511
|
Re: Banjo Switch Size
A pressure switch like that would be fairly common on offroad stuff or custom builds. It's definitely not standard, but also why not?
Would be cheaper than replacing the M/C |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Curvy banjo bolt thread size? | froymot | SV Talk, Tuning & Tweaking | 3 | 25-03-14 06:38 PM |
rear brake banjo size | barwel1992 | SV Talk, Tuning & Tweaking | 8 | 13-12-09 12:12 AM |
Rear Banjo Bolt Size | Sideshow#36 | SV Talk, Tuning & Tweaking | 2 | 06-07-09 10:31 AM |
Rear M/C Banjo size, 1.0 or 1.25 | Ter | SV Talk, Tuning & Tweaking | 5 | 08-11-06 12:34 AM |
What size is the banjo for the rear master cylinder? | northwind | SV Talk, Tuning & Tweaking | 11 | 27-04-06 11:08 PM |