Need a torque wrench. - SV650.org

Winder · 29-01-13, 12:44 PM

Anybody nearby that has a torque wrench that works at under 45nm and are willing to lend it to me Thursday and Friday?
My one is 45nm plus so is no good.
I can give you beer or hand jobs in return.

Fallout · 29-01-13, 12:57 PM

*runs out to buy a torque wrench and vaseline*

29-01-13, 02:00 PM

Quote:

Originally Posted by Fallout

*runs out to buy a torque wrench and vaseline*

Typical Fallout!

29-01-13, 02:12 PM

Quote:

Originally Posted by Fallout

*runs out to buy a torque wrench and vaseline*

Under-prepared. Should have the Vaseline already.

Wideboy · 29-01-13, 02:35 PM

I like to use the victims blood myself

dirtydog · 29-01-13, 02:48 PM

Go buy one you tight git!

Can you be trusted to return said tool in the same condition as it was borrowed?

29-01-13, 02:51 PM

Quote:

Originally Posted by Wideboy

I like to use the victims blood myself

Stains a little too much. I find you have to rub it a lot to get the stain out afterwards.

chris8886 · 29-01-13, 03:04 PM

i have a teng tools one that goes down to 40nm, but that probably isn't quite low enough for you i suspect and i live in watford so i would doubt you'd be prepared to come this far just to borrow it!

Winder · 29-01-13, 06:12 PM

Quote:

Originally Posted by dirtydog

Go buy one you tight git!

Can you be trusted to return said tool in the same condition as it was borrowed?

I am a tight git! All the 1/4 drive ones i have looked at go up to 25 or 30nm and my 1/2 drive starts at 45nm. I don't want that gap. The halfords professional 3/8 drive one is 8nm - 60nm but i have bugger all 3/8 sockets! If anyone can recommend one that goes from single figures to 45nm i will splash the cash.

Yes i can be trusted to treat others property with respect. I do have an Irish accent though, so people think i'm going to sell said object and put the money towards a transit van.

Quote:

Originally Posted by Wideboy

I like to use the victims blood myself

Everyone knows that tears provide the best lubrication.

Quote:

Originally Posted by chris8886

i have a teng tools one that goes down to 40nm, but that probably isn't quite low enough for you i suspect and i live in watford so i would doubt you'd be prepared to come this far just to borrow it!

Cheers chris but i'm after one that goes lower down the Nm range.

29-01-13, 06:13 PM

Think mine goes down to 28nm. Am away atm but I can let you have it on Sat morning.
Hand jobs fine mate, just give 'em a good wash first and put plenty of barrier cream on.

Cheers

29-01-13, 12:44 PM	#1
Winder Member Join Date: Mar 2011 Location: Moved again now in Bracknell Posts: 981	Need a torque wrench. Anybody nearby that has a torque wrench that works at under 45nm and are willing to lend it to me Thursday and Friday? My one is 45nm plus so is no good. I can give you beer or hand jobs in return. __________________ "Somewhere between happy and total f**kin wreck"

29-01-13, 12:57 PM	#2
Fallout Member Mega Poster Join Date: Jan 2012 Location: Basingstoke Posts: 2,983	Re: Need a torque wrench. runs out to buy a torque wrench and vaseline __________________ MotoGoLoco - You knows it The Shed - Suzuki GSX-R 750 K1 \| Triumph Tiger 1050 K6 Fallout Bikes (VLogs, Tutorials, Bike Vids) Fallout Breakbeat (My Music)

29-01-13, 02:35 PM	#5
Wideboy Evel Knievel Mega Poster Join Date: Jun 2007 Location: Eastleigh Posts: 4,641	Re: Need a torque wrench. I like to use the victims blood myself __________________ 05 DRZ400E RIP hovis

29-01-13, 02:48 PM	#6
dirtydog Knob faced knobster Mega Poster Join Date: Jan 2005 Location: Haslemere Posts: 5,419	Re: Need a torque wrench. Go buy one you tight git! Can you be trusted to return said tool in the same condition as it was borrowed? __________________ 2001 SV650 in shimmerin green, Not broken anymore Last edited by dirtydog; 29-01-13 at 02:50 PM.

29-01-13, 03:04 PM	#8
chris8886 Member Mega Poster Join Date: Oct 2006 Location: Hertfordshire Posts: 2,797	Re: Need a torque wrench. i have a teng tools one that goes down to 40nm, but that probably isn't quite low enough for you i suspect and i live in watford so i would doubt you'd be prepared to come this far just to borrow it! __________________ AR08 to AR13-QUALITY! 650s: '52 curvy in yellow, was my baby cbr600rr: Mivv exhaust and a bagster tank cover. Now gone to a new home. Daytona 675: Arrow can (with a baffle that's gone missing in action....), quickshifter, shorty levers, custom paintjob

29-01-13, 06:13 PM	#10
The Idle Biker Guest Posts: n/a	Re: Need a torque wrench. Think mine goes down to 28nm. Am away atm but I can let you have it on Sat morning. Hand jobs fine mate, just give 'em a good wash first and put plenty of barrier cream on. Cheers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Torque Wrench	lx_online	Stuff Wanted	19	13-09-11 03:34 PM
Low torque torque wrench suggestions?	sam anon	SV Talk, Tuning & Tweaking	3	03-12-09 09:32 PM
Torque Wrench	Splosh	Bikes - Talk & Issues	22	11-01-08 08:41 AM
Which torque wrench ??	pepe	SV Talk, Tuning & Tweaking	9	06-05-05 07:48 AM
Torque Wrench	TSM	SV Talk, Tuning & Tweaking	21	28-04-05 09:06 AM