SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
27-03-05, 10:31 AM | #1 |
Guest
Posts: n/a
|
Gear change selector
Hi.
Any ideas where I can get a replacement gear selector from for my K2 cos I snapped mine? Either second hand or new but cheaper than the dealer. |
28-03-05, 10:43 AM | #2 |
Guest
Posts: n/a
|
Demon Tweeks had gear lever and brake pedals for £59.88 and £51.74 respectively, but I think that is about the same as Suzuki charge. They are made by Woodcraft and can be found on page 186 of the 2005 catalogue.
I'm sure I've seen a budget range at £40 each, possibly M&P! |
28-03-05, 04:04 PM | #3 |
Guest
Posts: n/a
|
Could try these...
http://www.patternparts.net/ You will probably have to ring them as I cand find the item on the site. |
28-03-05, 08:28 PM | #4 |
Guest
Posts: n/a
|
ebay, look for SRAD items they'll fit.
|
28-03-05, 08:36 PM | #5 |
Guest
Posts: n/a
|
Which bit is snapped? If it's just the part with the rubber, then it's easy enough to drill through and put a bolt in with a locking nut the other side. Works even better if you thread the hole.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
gear selector rod thing | husky03 | Stuff Wanted | 7 | 31-01-08 07:02 PM |
Gear selector problems | gemma1675 | SV Talk, Tuning & Tweaking | 1 | 05-09-07 11:49 AM |
Gear Selector Jammed | gman | SV Talk, Tuning & Tweaking | 9 | 10-12-05 07:13 PM |
Gear Selector Foot Peg | T0mm0 | SV Talk, Tuning & Tweaking | 17 | 10-08-05 02:38 PM |
Gear selector for my Sk1 | sexysi | SELKENT | 4 | 22-04-05 03:42 PM |