SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
08-05-18, 10:15 PM | #1 |
Member
Join Date: Apr 2018
Location: N.Ireland
Posts: 40
|
Rust in brake lines / K1 Wakeup after 10 years
Continuing the process of waking my k1 SV650 up after 10 years in storage.
While waiting for some workshop supplies to arrive, I decided to take the brake lines off as there was a buildup of rusty slime on the banjos and bolts as a result of water in the brake fluid. Having gotten them cleaned, decided to strip the whole brake system and sure enough the other hoses had a buildup of rust in them too. Was thinking of blowing them out with compressed air - any thoughts if this will be enough to get all the crap out of them? Front master cylinder seems to be seized, going to have a go at stripping it tomorrow. Last edited by netsurfer; 09-05-18 at 09:03 AM. |
09-05-18, 06:40 AM | #2 |
Member
Mega Poster
Join Date: May 2015
Posts: 1,238
|
Re: Rust in brake lines
You might be safer buying new braided hoses, rather than trying to clean out the old lines. The problem is, you can't easily see if there's any rusty crud left in the lines, even after blowing them through with an airline.
I'm not sure if there are any solvents you can use either (I have a dim memory that methylated spirit can be used to flush brake systems through, but please don't take my word for it). |
09-05-18, 06:59 AM | #3 |
Member
Mega Poster
Join Date: Feb 2017
Location: JAMOADR(1999 Curvy) 36,000 miles
Posts: 1,431
|
Re: Rust in brake lines
I'm with Craig380.Brakes are the only thing between you and the Headstone.Get new lines.
My 10 penn'th.
__________________
"Stultus est sicut stultus facit" |
09-05-18, 07:21 AM | #4 |
Member
Mega Poster
Join Date: Apr 2010
Location: Newcastle upon Tyne, Just south of salad dodging country
Posts: 7,750
|
Re: Rust in brake lines
Don't try and fanny on. Replace the lines, master cylinder internals and the brake seals and boots.
It's your safety at the end of the day Sent from my PRA-LX1 using Tapatalk
__________________
RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi |
09-05-18, 07:43 AM | #5 |
Member
Mega Poster
Join Date: Jan 2005
Location: Barnet Herts
Posts: 5,068
|
Re: Rust in brake lines
SV K1? Are they the original 17 year old lines?
If so I think your question answers itself. Get new ones.
__________________
On a clear day we stand there and look further than the ordinary eye can see. |
09-05-18, 08:08 AM | #6 |
Member
Mega Poster
Join Date: Feb 2017
Location: JAMOADR(1999 Curvy) 36,000 miles
Posts: 1,431
|
Re: Rust in brake lines
Also pull apart EVERY electrical connector and check and clean any corrosion.I do mine once every two years and use Switch cleaner
http://www.halfords.com/motoring/eng...-cleaner-400ml and then treat with ACF50 http://www.acf-50.co.uk/motorcycle.htm especially the the Main HT connector to the Regulator/Rectifier. People often overlook servicing electrical connections but they are just a important as any other part of servicing and especially on motorcycles that have been left unused for a long time as the contacts suffer from corrosion.
__________________
"Stultus est sicut stultus facit" |
09-05-18, 09:02 AM | #7 |
Member
Join Date: Apr 2018
Location: N.Ireland
Posts: 40
|
Re: Rust in brake lines / K1 Wakeup after 10 years
Thanks guys!
Was trying to keep the costs down as I may need to rebuild/replace the forks which wont be cheap. They most likely are the originals though so I best bite the bullet and replace them! Any recommendations? High performance or fancy looks are not requirements I had noticed a bit of corrosion on one of the electrical connectors in the under-tank area - will give them all a good going over before startup. Unfortunately there were a few things which went against me when I parked the bike up, 1) I didn't think it would be off the road for so long so didn't give it a good clean and oiling and 2) I covered it to keep the dust off but the cover seems to have encouraged the rusting process. The exhaust header bolts seem to be the biggest victim, hoping I don't need to take those out as one or two of them appear to have corroded away so badly that there is no doubt they will break off. Subframe appears to be very rough in places too, until I get it out I don't know if I can salvage it! Was hoping to upload some photos but still haven't been able to. Cheers Pete |
10-05-18, 08:05 PM | #8 |
Member
Join Date: May 2015
Location: Falmouth, Cornwall
Posts: 161
|
Re: Rust in brake lines
I agree with all the above, replace them for sure, anything that could compromise bringing the bike to a stop quickly should be avoided! I understand there is a cost element but very well worth it.
I have done a couple of videos on brakes, my channel is in my signature if that helps. I installed Hel brake lines which were great, as an alternative, another great British brand Venhill have given me a full set front and rear to do a video on, and I must say, they look really good. Fork rebuilds are getting closer to the top of my list... I have seen a rebuild kit (seals, dust cover, new bushes etc) online for £40 + 2 bottles of fork oil for £15 so £55 total.
__________________
New Girl Sets Up YouTube Channel on SV650- see my channel; Tamsen Cooper Like, Comment, subscribe |
10-05-18, 09:08 PM | #9 |
Member
Mega Poster
Join Date: Feb 2017
Location: JAMOADR(1999 Curvy) 36,000 miles
Posts: 1,431
|
Re: Rust in brake lines
Word of warning.Fitting none standard brake lines without certification e.g steel braided outers are considered an,"Upgrade" and anyone considering this should contact their Insurance company before fitting them to make sure they are covered under their,"Terms and Conditions" otherwise it can invalidate the Insurance.
This may seem petty but it's not.In the event of an accident and an Insurance assessor can find anything to save the Company money,they will.It's part of their job. Worse case scenario a 3rd part is injured.All hospital bills that may have been covered under a valid insurance are not paid and could lead to financial ruin for the holder of the policy. I'm not,"Scaremongering" just laying out what has happened to some. If in doubt,check with the insurance company.A few extra quid now can save a lot of grief later
__________________
"Stultus est sicut stultus facit" |
10-05-18, 11:52 PM | #10 |
Member
Join Date: May 2015
Location: Falmouth, Cornwall
Posts: 161
|
Re: Rust in brake lines
A friend of mine had an accident on his gsx and the whole front end was damaged. They didn’t pay out as he had an aftermarket exhaust fitted, therefore it was an undisclosed modification so he got the whole bill!! I was not aware of mods like brake hoses coming under this as whilst exhaust may affect performance (increase in horsepower etc) brake line do not... made me think about making a phone call to check unless anyone else on here has done that already?
__________________
New Girl Sets Up YouTube Channel on SV650- see my channel; Tamsen Cooper Like, Comment, subscribe |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Standard Brake calipers complete brake lines and master cylinder for sale | dblakey | For Sale - Other Bikes and General biking items | 0 | 29-06-16 07:55 PM |
Rust on brake disc. | Nick_69 | Bikes - Talk & Issues | 5 | 01-02-13 08:28 AM |
Wanted pointy rear undertray or tail tidy, braided brake lines, wavy brake discs. | Chris*2700 | Stuff Wanted | 3 | 07-10-12 11:25 AM |
SV Racing Parts, GSXR Brake Caliper Adapter Brackets, & Galfer SS Brake Lines & Pads | sv-racing-parts | SV Talk, Tuning & Tweaking | 42 | 15-09-11 10:27 PM |
HEL Brake Lines | buckstone | SV Talk, Tuning & Tweaking | 1 | 20-05-08 04:24 AM |