Lower fairing belly fixings - SV650.org

DomP · 26-02-17, 03:01 PM

Always meant to sort this out, my pointy lower fairings but together in the belly region with 4 holes that are cable tied in pairs. Can't believe this is standard, should there be a plate with 4 plastic pop rivets?

Blapper · 26-02-17, 03:27 PM

If it is anything like the curvy, there are clips that push over one side then screws go through the other side into the clips. Go to your local dealer for them - they shouldn't be toooo expensive

DomP · 26-02-17, 03:50 PM

Thanks Blapper

fulburncams · 26-02-17, 04:03 PM

Hi , On my 2004 K3 there is a small black plastic sort of panel/hinge at the bottom with four holes. On my bike there are currently three plastic rivets attaching the fairing to this so am looking to get some on ebay , I think this is the link ..
http://www.ebay.co.uk/itm/20x-Suzuki...-/371405317080

Cheers Steve

Blapper · 26-02-17, 04:40 PM

Ah, so the pointy is different then.

fulburncams · 26-02-17, 05:39 PM

Yes I guess pointy's are different from your description. The holes on my fairing are 6mm dia ( the rivets come in 6 or 8 mm diameter packs ) , there are multiple suppliers on ebay. The black plastic plate/hinge thing is approx 55mm square. Cheers Steve

26-02-17, 03:01 PM	#1
DomP Member Join Date: Oct 2014 Location: Kington Herefordshire Posts: 916	Lower fairing belly fixings Always meant to sort this out, my pointy lower fairings but together in the belly region with 4 holes that are cable tied in pairs. Can't believe this is standard, should there be a plate with 4 plastic pop rivets? __________________ Black 2010 SV650S Fully faired White 2011 YZF R125 sold

26-02-17, 03:27 PM	#2
Blapper Member Join Date: Jun 2016 Location: Rochester,Kent. Posts: 824	Re: Lower fairing belly fixings If it is anything like the curvy, there are clips that push over one side then screws go through the other side into the clips. Go to your local dealer for them - they shouldn't be toooo expensive

26-02-17, 03:50 PM	#3
DomP Member Join Date: Oct 2014 Location: Kington Herefordshire Posts: 916	Re: Lower fairing belly fixings Thanks Blapper __________________ Black 2010 SV650S Fully faired White 2011 YZF R125 sold

26-02-17, 04:03 PM	#4
fulburncams Junior Member Join Date: Nov 2016 Location: Cambridge uk Posts: 28	Re: Lower fairing belly fixings Hi , On my 2004 K3 there is a small black plastic sort of panel/hinge at the bottom with four holes. On my bike there are currently three plastic rivets attaching the fairing to this so am looking to get some on ebay , I think this is the link .. http://www.ebay.co.uk/itm/20x-Suzuki...-/371405317080 Cheers Steve

26-02-17, 04:40 PM	#5
Blapper Member Join Date: Jun 2016 Location: Rochester,Kent. Posts: 824	Re: Lower fairing belly fixings Ah, so the pointy is different then.

26-02-17, 05:39 PM	#6
fulburncams Junior Member Join Date: Nov 2016 Location: Cambridge uk Posts: 28	Re: Lower fairing belly fixings Yes I guess pointy's are different from your description. The holes on my fairing are 6mm dia ( the rivets come in 6 or 8 mm diameter packs ) , there are multiple suppliers on ebay. The black plastic plate/hinge thing is approx 55mm square. Cheers Steve

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pointy lower fairing fixings.	Wayno	Stuff Wanted	17	05-04-14 05:05 PM
YC2 belly pan or lower fairing wanted	joe_f59	Stuff Wanted	3	13-09-11 08:09 PM
Pointy belly pan/lower fairing fitting kit - dimensions please	.aj.	Bikes - Talk & Issues	0	02-09-10 07:44 AM
Lower Fairings / Belly Fairing	cloudsurferuk	SV Talk, Tuning & Tweaking	4	23-07-10 05:03 PM
lower fairing fixings	gralln9	Stuff Wanted	0	12-08-08 03:39 AM