suzuki sv 650 from Italy asks for help with their tuning

Hello, turning to forums and forums that talk about SV 650 the best site I've found is yours, the photos that you have made your travels are no words.











I am using google translator to write, most likely there will be some error
I would like to know where I could post my pattern for tuning my bike Suzuki SV 650
I have presented on the forum because I can not find the appropriate section, you could link me?

I would like to ask if you could direct me to the section of the forum where you can post your own schema of aesthetic tuning.

Hello, I have collected some ideas on the pieces that I would mount on my bike.
The pieces that lead to damages because they are forced to change the look of the bike are the front light, levers, and part of the front fairing, it has some small graphs due to a fall.
It is not easy to find parts compatible with the SV 650, I noticed that the other pieces of mountain bike sv 650, I took inspiration from this site (The page is translated into French in Italian with google).

I use this site to get ideas and to mount

[Size = 18] chain guard rear fender

Front fender racing

Radiator Scoops with the retina to be included

Passing car with the wheel [/ size]





I did not understand that part of the bike when it refers to the site it says "[size = 18] Sabot evolving motorcycle cover 2 [/ size] will be included with the retina," you have understood what piece you talking about?


The material of the retina remains to be seen ...

This month I will change the knobs and their Estrima, [what is their technical name?] And spechietti, take them approved, but I do not know what, I know that will focus on the original and we'll put on a special adhesive ... I was thinking of spechietti with the LED arrows, but there are many approved that year for my case.
I can advise that the knobs are very small and this bike vadi well?
[Color = red] I wish I had the rear with LED lunghee, well I have to change the rear fairings, how can I have them ???[/ color]
More than a question of aesthetics is a matter of affidibilità. ^? 1:


The bike was a Suzuki 2001, any advice I would be fine pieces sites ETCC ...
I asked about the store at that site based in turin, their site is more messed up than the official one, is not treated at all, is not as detailed.
I asked for information by e-mail requesting information on the material (color, material and otherwise).

[TamSV]

OK. Google translate is struggling, but I'll have a go.

It looks like you are on the Poly 26 website. Their products are made from "finiti mal vetroresina". You need to paint them - no colour choices.

It has some style and can be made to look good but both fit and finish need a lot of work.

Yes, I noticed.
I do not think that I will buy from that site, but I must say it helped me to orient myself in the world of tuning: D

http://www.twinshack.co.uk/prods/pc18.html

Originally Posted by davepreston

http://www.twinshack.co.uk/prods/pc18.html

ahhhhh too many ideas all at once, as if I had not already confusing ...
So I plan to finish my bike issued by the end of January
__________________________________________________ ________________
Traduttore









I have recommended your site is very interesting, but watching the price and shipping costs should reach 400 euro: D
Motoclubtinga on the forum I have recommended a motorcycle shop online in rome and I've found a 1 hour from my house.
It is not easy k1 components of this are rare in Italy, more than ever!
here is what I wrote to you, and I want to do on the forums


aaa
Even if we start from an idea then it can even be changed for the better!
I was advised to look at the site of Kompo-tech, one of the few that sell motorcycle parts for the SV 650 K1!

I would say that these pieces are better and much easier to retail information.
Here it is as it should be










La parte migliore è questa ^?a:




The best part is that ^? To: [img] http://www.motoxpricambi.com/public/puntale 20sv%% 2003% 2007.jpg [/ img]


Now I see that side panels mounted (scorpions or other brand), meanwhile, wonder about the tip is made of fiberglass material to paint.
: grin:


If you want to know what is written in the forum I'm talking about here is

http://www.motoclub-tingavert.it/t644665s.html
you could use google translator

Hello, here I am there I forgot So .. This month I mounted the tires Metzler M5 and I bought these arrows to the barracuda bulb
http://www.ebay.it/itm/CUDA-FRECCE-M...item1c1f561488

The next month, will buy the specchieti LED and built-in pads for the handlebars and grips and new brake levers, before moving on to real tunnig I would like to think about security.
The pieces for my SV 650 K1/K2 want them all approved



proposal and any advice or help

I apologize for the Italian. CIAOOOO

AH PS PS