GSXR 600 K2 front fork swap?

Managed to get some GSXR K2 600 front forks and wondered if they can be swapped onto a Naked SV650 '99.

Would any one know what other parts I would need as I only have the fork legs

cheers in advance for any help

Ignore !!!

[yorkie_chris]

TLS clipons will NOT FIT!

You need some 43mm clipons.

Find a pair of SRAD6 yokes or a SRADtop and K1-3 bottom, I think offset

oops must have been half asleep when i put that up, there RWU forks ?

[yorkie_chris]

Yes, the rest of what you put was valid though!

Her we go again so

the front wheel you want will be from the following bikes.

GSXR 600 K1-K5
GSXR 750 Y-K5
GSXR 1000 K1-K4

However the discs you want have a greater range.

GSXR 600 1996-2003, not 2004/2005 as these are smaller diameter - 300mm
Same years with the 750

GSXR 1000 K1 or K2 only, not K3/K4 as these are 300mm

But in addition to the GSXR you can also use the discs from the Suzuki Hayabusa and the Suzuki TL1000S and R.


Chris you hardly have a spare front wheel and discs for me

[yorkie_chris]

Sorry no, need some SRAD front stuff myself..

Seems this year really is the "front end mod" year for everybody .. must be recession driven

[Nicky S]

i know this has been done over and over again so sorrie before i begin. iv been looking at pages and pages of gsxr swaps and the parts you need ect. but i still cant get my head around it all. looking at svrider i think i have a good sort of idea what i need.

bearings
yorkes
forks
wheel
discs
fender

then the spedo which seems to have loads of diffrent ways of doing it.

have i left anything out ?

but the only problem i have is im not sure what bike it all has to come from or year. also i dont wont to use clipons so i take it i can just drill in the top york and stick bar rasiers in.

is there any chance some one can tell me what bits i need from what bike

my bike is a 2002 curvy

[yorkie_chris]

Calipers also.

Use a complete SRAD front on a curvy is easiest. (96-99)

Yeah you can drill for the risers.