SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
12-03-07, 01:42 AM | #1 |
Guest
Posts: n/a
|
R & G engine protectors (Brackets req'd)
as sum of you may know im trying to find brackets to fit my sv650 k3 lower fairings, has any 1 fitted R&G engine protecors to there bike as these like like they replace the main bent shape brackets that i need, i think i could make up any other brackets as req (small ones at bottom of fairing etc)
looks good to me on the R&G website..............??? www.rg-racing.com |
12-03-07, 12:14 PM | #2 |
Guest
Posts: n/a
|
Re: R & G engine protectors (Brackets req'd)
Engine protectors? R and G say they only do them for an R6 and a Z1000. Do you mean the main mushrooms?
|
12-03-07, 12:20 PM | #3 |
Guest
Posts: n/a
|
Re: R & G engine protectors (Brackets req'd)
i had the r&g's on a k4 650's. they are a serious bit of kit, id recommmend them without hesitation the suxuki oem ones are flimsy to say the least, the r&g one has a very substantial billet ali block that bolts to the frame then the protector fits through the fairing straight into the block, one of the major flaws of the suzuki ones is that to get the slider mounted they produced some stupid bent bracket, you only have to look at it and itll bend, mine snapped when the bike fell off the stand, luckily it saved the fairing, but it was dead at zero mph.
get the r&g's expensive but really good |
12-03-07, 02:08 PM | #4 |
Moderator
Mega Poster
Join Date: Jan 2004
Location: In the garage where I belong
Posts: 17,082
|
Re: R & G engine protectors (Brackets req'd)
The bracket's brilliant, but I reckon the bung itself's too bendy... But if it does replace the fairing brackets (I think that's the question here?) then that'd make a lot more sense.
__________________
"We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed" |
12-03-07, 06:54 PM | #5 |
Guest
Posts: n/a
|
Re: R & G engine protectors (Brackets req'd)
|
13-03-07, 11:14 AM | #6 |
Guest
Posts: n/a
|
Re: R & G engine protectors (Brackets req'd)
the r+g ones replace the existing bendy brackets
|
13-03-07, 12:31 PM | #7 |
Guest
Posts: n/a
|
Re: R & G engine protectors (Brackets req'd)
When i crashed my faired k5 the bung bolt nut snapped the bracket only got a few grazes......saved the frame getting any marks as bike slid along floor
|
13-03-07, 07:56 PM | #8 |
Moderator
Mega Poster
Join Date: Jan 2004
Location: In the garage where I belong
Posts: 17,082
|
Re: R & G engine protectors (Brackets req'd)
This is the trick though, how do you know? It's pretty rare for an SV frame to touch down even without bungs, as they're well protected by bodywork, tank, bars etc.
__________________
"We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed" |
13-03-07, 08:38 PM | #9 |
Guest
Posts: n/a
|
Re: R & G engine protectors (Brackets req'd)
It is a thick block that kept the bike quite a bit higher of the ground as it slid along and it certainly saved something if not the frame
|
13-03-07, 09:16 PM | #10 |
Moderator
Mega Poster
Join Date: Jan 2004
Location: In the garage where I belong
Posts: 17,082
|
Re: R & G engine protectors (Brackets req'd)
Yeah, I know, I had a set myself... But we're all guilty of it, assuming that bungs have helped tons when really we have no idea what would have happened without them My first ever crash, I had those £6.99 ebay bungs fitted, the rubbish ones. They never even touched the ground, and the bike was almost unscathed- cracked front fairing and a bent rear master cylinder pushrod, nothing really considering. But I bet you a pound if I'd had my motosliders fitted I'd have said how they saved loads of damage
__________________
"We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed" |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Curvey carbon engine protectors | r4ce_e3nd | For Sale - SV's and SV related items | 1 | 30-08-08 10:23 AM |
Visual Basic help req'd | Supervox | Idle Banter | 6 | 22-06-07 10:56 AM |
HELP !! IT Bod req'd !! | Supervox | Idle Banter | 17 | 17-04-07 01:31 PM |
fork oil 15 or 20? advice req'd. | will | SV Talk, Tuning & Tweaking | 11 | 20-06-05 07:16 PM |
radiator problem? help req'd. | will | SV Talk, Tuning & Tweaking | 4 | 15-04-05 07:24 PM |