Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola! Need Help: Try Searching before posting |
|
Thread Tools |
11-11-15, 04:47 PM | #1 |
Guest
Posts: n/a
|
Headlamps
While I am waiting for my brake bleeder to arrive I am going to try and sort out my headlamps.
When I got the bike the sidelights worked fine and also the man beam and pass light but not dipped beam. I stripped the switchgear and sprayed all of the inside with contact cleaner and now no headlights at all. I love electrics Regards James |
12-11-15, 05:22 PM | #2 |
Member
Mega Poster
Join Date: Jan 2004
Location: Whyteleafe
Posts: 3,395
|
Re: Headlamps
Green connector woes. It's right inside the fairing and you have to take it all off to get at it. Plenty of threads on it already.
__________________
Silver SV650SK3, Fuel exhaust |
13-11-15, 06:16 PM | #3 |
Member
Join Date: Jun 2012
Location: Chelmsford
Posts: 410
|
Re: Headlamps
If it's a pointy it's the connector block just behind the headstock (raise tank and air filter). Yellow and white cables. Bypass the dodgy cable connections with well protected automotive connectors (spade/bullet). Job done.
If you need any more info, holler.
__________________
Thought I was in a bad mood, but it's been 30 years now, so I suppose it's just who I am. 05 SV650s now with proper suspension, hurrah! |
14-11-15, 09:39 PM | #4 |
Guest
Posts: n/a
|
Re: Headlamps
Thanks it was the connector block so fixed now
|
16-11-15, 01:39 PM | #5 |
Guest
Posts: n/a
|
Re: Headlamps
So I have a right dashboard disco now as the connector seems to be completely knackered so looks like replacement loom or spade connectors
|
16-11-15, 07:09 PM | #6 |
Member
Join Date: Jun 2012
Location: Chelmsford
Posts: 410
|
Re: Headlamps
B#gger!
Trouble is they all seem to suffer to some extent so a second hand one could be just as bad?! And then there's the connector on the other part of the loom... by-pass the lot? What's the best way forward? Probably best answered by someone with more savvy than me.
__________________
Thought I was in a bad mood, but it's been 30 years now, so I suppose it's just who I am. 05 SV650s now with proper suspension, hurrah! |
17-11-15, 04:56 PM | #7 |
Member
Mega Poster
Join Date: Jan 2004
Location: Whyteleafe
Posts: 3,395
|
Re: Headlamps
spade connectors are pennies and a replacement loom is ££££££ so I know which one I'd try first.
__________________
Silver SV650SK3, Fuel exhaust |
17-11-15, 06:17 PM | #8 | |
Member
Join Date: Jun 2012
Location: Chelmsford
Posts: 410
|
Re: Headlamps
Quote:
Cordless soldering iron and a pocket full of spade connectors! Plenty of time and patience... great when it's all done and everything works as it should all the time!
__________________
Thought I was in a bad mood, but it's been 30 years now, so I suppose it's just who I am. 05 SV650s now with proper suspension, hurrah! |
|
18-11-15, 12:31 PM | #9 |
Guest
Posts: n/a
|
Re: Headlamps
job lot of bullet connentors on there way
|
22-11-15, 10:01 AM | #10 |
Guest
Posts: n/a
|
Re: Headlamps
50p fix isolated the dipped beam from the block and spade connectors job done.
Just speedo bulb to do then can start thinking about putting it all back together |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Adjusting headlamps? | Curvieone | SV Talk, Tuning & Tweaking | 0 | 26-03-10 10:21 PM |
Upgrade Your Headlamps | G | The Border Patrol | 17 | 24-11-07 08:20 PM |
Best way to uprate headlamps | JakeRS | SV Talk, Tuning & Tweaking | 13 | 18-11-06 07:16 PM |
Headlamps K4 SVS | Shivy | SV Talk, Tuning & Tweaking | 10 | 14-05-06 11:23 PM |
Best way to uprate headlamps | hawker | Idle Banter | 0 | 09-01-70 01:46 AM |