SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
I've noticed that the chain on my curvy has a few stiff links and isn't looking to healthy. I think it was pretty much neglected by the previous owner. I've degreased it and applied fresh Chain wax and it's a bit better but still has the stiff links. As a result the chain is very very slack at some points and tight at others.
Should I just get a new chain and sprockets for it to overcome this or is there something else I can do to fix this. If I should replace, where is likely to be the best (reasonably priced) place to get them and should I go for a better quality chain or is it not worth it. I seen this on ebay, http://cgi.ebay.co.uk/Chain-Sprocket...713.m153.l1262 does anyone know if they're any good? Any help/advice would be much appreciated. Thanks Gav |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
if you are looking a new chain and sprocket kit try B&C ther on the net price them for the items you may get it a bit cheaper than the 80 quid one on the link.
![]() |
![]() |
![]() |
#3 | |
Guest
Posts: n/a
|
![]() Quote:
You really need to get something like wd40 into the links to free them up before putting chain wax on. I stopped using Chainwax because I had an uneasy feeling that it wasn't going where it should. John |
|
![]() |
![]() |
#4 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Try using real chain lube after giving it a scrub with a toothbrush and parrafin.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#5 |
Member
Mega Poster
Join Date: Aug 2003
Location: Croydonia
Posts: 5,376
|
![]()
By all means scrub it up again and use some heavy motor oil or similar to lubricate, but I'd say it's probably had it. Call your local bike shops and get a price for fitting a new chain.
__________________
Modern motorcycles are bloody brilliant, enjoy it while we can ![]() |
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
Thanks
If I do need a new chain, is it always best to replace the sprockets aswell, at the same time, or does it not matter. |
![]() |
![]() |
#7 | |
Guest
Posts: n/a
|
![]() Quote:
About 7000 miles ago, before I fitted the Scott Oiler, I had a 'stiff' link. Cleaned the chain thoroughly and lubed it well with engine oil - no problem since. ![]() |
|
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]()
I also need to change my chain & was thinking of changing the gearing at the same time - any advice on number of teeth for the front & rear sprockets?
|
![]() |
![]() |
#9 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Naked gearing IMO a good compromise
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]()
For a standard SV engine I'd say go for the naked sprockets (15-45)! Also always changed your chain and sprockets together as a set.
Last edited by Dangerous Dave; 01-03-08 at 04:51 PM. |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chain And Sprockets | squirrel_hunter | SV Talk, Tuning & Tweaking | 10 | 19-05-09 10:28 PM |
Chain and sprockets | pencil shavings | SV Talk, Tuning & Tweaking | 32 | 23-09-08 10:14 AM |
chain + sprockets? | lancasterlad | SV Talk, Tuning & Tweaking | 2 | 06-08-07 08:01 PM |
chain and sprockets | adey | Stuff Wanted | 4 | 27-11-05 01:26 PM |
Chain & Sprockets | BaggaZee | SV Talk, Tuning & Tweaking | 23 | 12-01-05 07:07 PM |