SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
05-10-10, 12:21 PM | #1 |
Guest
Posts: n/a
|
GSXR front end re-valve/re-spring, guide?
Alright folks this question is orientated towards the racers here.
Who has had their GSXR front ends re-valved/re-sprung to suit the SV?? Who done it?? How much did it cost?? Noticable difference?? Ive a K4 1000 front end on my K3 SV and its being pulled down soon to be done over the winter. Thanks for your help |
05-10-10, 02:20 PM | #2 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: GSXR front end re-valve/re-spring
Me
Me £80 for springs and about £20 worth of shims Yes, enormous difference, night and day... the same difference you'd note going from SV to GSXR. But that is comparing with older SRAD stuff (soft), not sure offhand what springs K4 thou has as stock.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
05-10-10, 05:26 PM | #3 |
Guest
Posts: n/a
|
Re: GSXR front end re-valve/re-spring
i might consider doing this in the future aswell, i think the k4 1000 forks are 0.85kg/mm which is one of the reasons why i used them as a lot of people my weight have changed the springs in the sv forks for the same. Iv checked the preload and sag though and it could probably do with softer springs think a trip to someone who knows what theyr doin is in order!!
|
07-10-10, 07:22 AM | #4 |
Guest
Posts: n/a
|
Re: GSXR front end re-valve/re-spring
|
10-10-10, 12:31 PM | #5 |
Guest
Posts: n/a
|
Re: GSXR front end re-valve/re-spring
Whats the deal with changing shims?? did you get springs for your weight for an SV650??
|
14-11-10, 11:23 AM | #6 |
Guest
Posts: n/a
|
Re: GSXR front end re-valve/re-spring
Ressurecting this again. Im gonna tackle this very soon. Anybody got a guide on it??
|
14-11-10, 12:40 PM | #7 | |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: GSXR front end re-valve/re-spring
Quote:
To change the shims you need to strip the forks down to bare parts. Then it depends if pistons in those forks are worth re using or changing for some other high flow type depending on use.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
|
12-02-11, 05:40 PM | #8 |
Guest
Posts: n/a
|
Re: GSXR front end re-valve/re-spring, guide?
Just to update this I ended up sending my front forks to PLR Suspension in Northern Ireland and they fitted a K-Tech 20mm kit including new adjusters and springs. I shall report back when I get her out for a test spin
|
12-02-11, 05:47 PM | #9 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: GSXR front end re-valve/re-spring, guide?
What did that set you back?
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
12-02-11, 05:51 PM | #10 |
Guest
Posts: n/a
|
Re: GSXR front end re-valve/re-spring, guide?
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fitting GSXR front mudguard to GSXR USD forks | maviczap | SV Talk, Tuning & Tweaking | 1 | 20-02-10 10:05 PM |
Pictorial and in depth guide to Valve clearance checks and re-shimming. | jimmy-james | SV Talk, Tuning & Tweaking | 7 | 27-11-08 09:59 AM |
Valve spring compressors? | northwind | SV Talk, Tuning & Tweaking | 8 | 20-07-08 10:34 AM |
GSXR 1000 yokes for GSXR front end swap SOLD | Khewett | For Sale - SV's and SV related items | 3 | 30-05-06 12:03 PM |
GSXR rear shock stock spring rates | lukemillar | Bikes - Talk & Issues | 3 | 07-05-06 01:38 PM |