fitting of race fairing

After a bit of advice regarding mounting of a gsxr k6/7 race fairing, trying to find a spot to locate the lower fairing on the right hand side of the bike,any tips please ?
ps, its a k6 sv bike that we're fitting it to .

[flymo]

Originally Posted by redbiker 954

After a bit of advice regarding mounting of a gsxr k6/7 race fairing, trying to find a spot to locate the lower fairing on the right hand side of the bike,any tips please ?
ps, its a k6 sv bike that we're fitting it to .

Only way Ive seen this done is to either drill/tap a whole into the frame to fasten to.

Mike

Originally Posted by redbiker 954

After a bit of advice regarding mounting of a gsxr k6/7 race fairing, trying to find a spot to locate the lower fairing on the right hand side of the bike,any tips please ?
ps, its a k6 sv bike that we're fitting it to .

i used we brackets on mine tho that was useing a K5 fairing and my bike is a k4/k5 model but it may give you an idea!

if you want 2 no anything else on it feel free 2 PM me and il try and help ya?

[fastdruid]

I've fitted one to a curvey, you've probably done it by now and not really the same but just in case it gives anyone else searching for this some hints.

I cut about 2 inches out of the belly pan and fibreglassed it back together

Made up right angle brackets to locate the upper fairing.

Made up a bracket off the exhaust hanger for the right


And one off the sidestand bracket for the left



Finished article used in 'anger'


Druid