clutch cover outer O'ring part no. 11484-19F01 - SV650.org

Duke · 17-03-07, 07:02 PM

I have a clutch cover outer O'ring, Suzuki part number 11484-19F01. I ordered this for my 1999 SVSX bike, but it does not fit, probably as my bike is a very early import model.
The part is new and has not been used, though I opened the bag only to find that it was too big. It cost me about £10, but give me £5 and I will include the postage.

Duke

18-03-07, 05:20 PM

If it'll fit mine I'll have it. It's a 1999 naked SV650 standard UK model.

Cheers.

Duke · 18-03-07, 06:24 PM

Paul,

I can't guarantee that it will fit your bike. I suggest that you contact a dealer and give them your frame number to confirm. My fame number did not have as many digits as expected and the guy guessed from the fiche.

Duke

18-03-07, 10:38 PM

OK mate cheers will look into it.

Scoobs · 19-03-07, 08:32 AM

I had the same problem when I replaced the O ring. You could cut a bit out and lay the seal in with the cut at the top of the cover. Use some Blue Hylomar gasket seal. Jobs a goodun.

Duke · 19-03-07, 07:06 PM

That is what the previous owner had done and it was leaking. Just wanted to sort it without much faff. I have now gone down the route of cutting my own gasket and more gasket gue. Not ideal - would like the proper seal. But I have other issues to sort for now.

Duke

Duke · 25-03-07, 04:23 PM

Any takers on this?

17-03-07, 07:02 PM	#1
Duke Member Join Date: Nov 2006 Location: Cheshire Posts: 57	clutch cover outer O'ring part no. 11484-19F01 I have a clutch cover outer O'ring, Suzuki part number 11484-19F01. I ordered this for my 1999 SVSX bike, but it does not fit, probably as my bike is a very early import model. The part is new and has not been used, though I opened the bag only to find that it was too big. It cost me about £10, but give me £5 and I will include the postage. Duke

18-03-07, 05:20 PM	#2
Paul M Guest Posts: n/a	Re: clutch cover outer O'ring part no. 11484-19F01 If it'll fit mine I'll have it. It's a 1999 naked SV650 standard UK model. Cheers.

18-03-07, 06:24 PM	#3
Duke Member Join Date: Nov 2006 Location: Cheshire Posts: 57	Re: clutch cover outer O'ring part no. 11484-19F01 Paul, I can't guarantee that it will fit your bike. I suggest that you contact a dealer and give them your frame number to confirm. My fame number did not have as many digits as expected and the guy guessed from the fiche. Duke

18-03-07, 10:38 PM	#4
Paul M Guest Posts: n/a	Re: clutch cover outer O'ring part no. 11484-19F01 OK mate cheers will look into it.

19-03-07, 08:32 AM	#5
Scoobs Vipers Pillion Bitch Mega Poster Join Date: Jul 2003 Location: Waterlooville Posts: 3,933	Re: clutch cover outer O'ring part no. 11484-19F01 I had the same problem when I replaced the O ring. You could cut a bit out and lay the seal in with the cut at the top of the cover. Use some Blue Hylomar gasket seal. Jobs a goodun. __________________ I look good, I mean really good! Hey everyone come and see how good I look!

19-03-07, 07:06 PM	#6
Duke Member Join Date: Nov 2006 Location: Cheshire Posts: 57	Re: clutch cover outer O'ring part no. 11484-19F01 That is what the previous owner had done and it was leaking. Just wanted to sort it without much faff. I have now gone down the route of cutting my own gasket and more gasket gue. Not ideal - would like the proper seal. But I have other issues to sort for now. Duke

25-03-07, 04:23 PM	#7
Duke Member Join Date: Nov 2006 Location: Cheshire Posts: 57	Re: clutch cover outer O'ring part no. 11484-19F01 Any takers on this?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch cover 01 Curvy	jumjum_0214	Stuff Wanted	9	10-10-08 05:08 PM
pointy Clutch outer/complet engine	toadie	Stuff Wanted	1	19-06-08 08:42 AM
Clutch Cover	carsounds_dan	SV Talk, Tuning & Tweaking	17	12-06-08 04:27 PM
Clutch cover.	scottjames	SV Talk, Tuning & Tweaking	8	16-04-08 11:30 AM
Outer clutch cover gasket on curvy	UKStreetFighter	Stuff Wanted	6	08-03-07 02:38 PM