SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
10-09-18, 06:06 PM | #1 |
Guest
Posts: n/a
|
Cutting out as pulling up to junctions
Looking for some pearls from the guru's.
So I have had my sv650s 2010 faired since last December and bought from a guy off here. Done maybe 2000 miles on it without any trouble. (1000 3 weeks ago to Scotland and back) So today I was out for a quick blast and as I was pulling up to a couple of junctions the bike stalled, however not everytime. It stalled the first time with the clutch engaged however the second time the clutch was out as it started to stall and I tried to pull it in to save it but it still died. After a couple of on offs it let me start again and pull away although once after it died as i was pulling away. Bit of extra info checked the clutch switch, kill switch and sidestand switch with a multi meter and they all show open/closed as expected when operating. Oil level is just below the full line as is the coolant and it idles roughly 13/1400. Cheers Graeme Last edited by GraemeC123; 15-07-19 at 07:41 PM. |
10-09-18, 07:15 PM | #2 |
Member
Join Date: Aug 2018
Posts: 142
|
Re: Cutting out as pulling up to junctions
Wet front plug complete guess.
|
10-09-18, 07:20 PM | #3 |
Guest
Posts: n/a
|
Re: Cutting out as pulling up to junctions
|
10-09-18, 08:02 PM | #4 |
Member
Mega Poster
Join Date: Jan 2004
Location: Whyteleafe
Posts: 3,395
|
Re: Cutting out as pulling up to junctions
Maybe tip over sensor come loose. It's under the seat somewhere.
__________________
Silver SV650SK3, Fuel exhaust |
10-09-18, 08:06 PM | #5 |
Member
Mega Poster
Join Date: Mar 2007
Posts: 9,096
|
Re: Cutting out as pulling up to junctions
Although mine is a curvy, mine did this when the Reg rect went AWOL.
__________________
We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius |
10-09-18, 11:26 PM | #6 |
Member
Join Date: Feb 2015
Location: Rainham, Essex
Posts: 143
|
Re: Cutting out as pulling up to junctions
have you recently replaced your clutch lever?
|
11-09-18, 06:42 AM | #7 |
Guest
Posts: n/a
|
Re: Cutting out as pulling up to junctions
|
11-09-18, 08:54 AM | #8 |
Member
Mega Poster
Join Date: Jan 2005
Location: Barnet Herts
Posts: 5,070
|
Re: Cutting out as pulling up to junctions
Its worth pulling the plugs to see what state they are in and cleaning them. You may have a problem with the mixture which will show as sooty or very white plugs. The intermittant thing might be a dodgy temp sensor making it run too rich as though for a cold start.
__________________
On a clear day we stand there and look further than the ordinary eye can see. |
11-09-18, 09:51 AM | #9 |
Member
Join Date: May 2015
Location: Fife
Posts: 112
|
Re: Cutting out as pulling up to junctions
throttle cable free play? presumably its cutting out when hitting the throttle stop, or adding throttle?
|
11-09-18, 11:15 AM | #10 |
Member
Mega Poster
Join Date: Jul 2003
Location: Doncaster, oop norf
Posts: 2,126
|
Re: Cutting out as pulling up to junctions
Hmm I'd check the carb balance, the tip over switch, and also the main connector from the solenoid to the rest of the bike (the square plug) as it has been known for the main pin to start to melt into the plug and lose contact, but usually you notice other things as well (crazy tacho etc.), sooner or later
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pointy tick over cutting out/ cutting out in general | Penry | SV Talk, Tuning & Tweaking | 2 | 22-09-13 02:07 PM |
Brakes pulling | SUPERSTARDJ01 | Bikes - Talk & Issues | 11 | 15-09-09 12:45 PM |
Want to use the cycle box at junctions legally? | the_lone_wolf | Bikes - Talk & Issues | 5 | 14-08-08 06:13 PM |
it's worth pulling it off sometime... | Shooter | SV Talk, Tuning & Tweaking | 0 | 01-01-05 08:24 PM |
SV smashed by car pulling out | SV Stu | SV Talk, Tuning & Tweaking | 28 | 31-12-04 05:04 PM |