SV650.org - SV650 & Gladius 650 Forum



Thames Valley Rideouts and meets for Thames Valleyers and beyond..

Reply
 
Thread Tools
Old 08-06-10, 11:50 PM   #31
Miss_Undaztood
Guest
 
Posts: n/a
Default Re: I have a new project - and it has 4 wheels!!!

If the needle valve is grooved it could be flooding, hence the poor fuel consumption and the mixture screw not doing much, especially if thats been screwed in too tight and grooved too. With the engine running, the screw should stall the engine if you wind it in enough. Jets are so small that they you cant really tell if their worn unless you compare them to new ones. Sounds like its gubbed.
Burlen fuel systems and carburettor hospital are good for parts for classic stuff, and for info, you might find the carb is a specific set up for the CF against other GM stuff.
I used to have some CF parts but i`m sure they got binned in a clearout years ago but i`ll have a look if I have anything your welcome to it.

EDIT: Infact, i`ve still got my Burlen catalogues, if you give me the details of the van i`ll have a look and tell you whats compatible and see if theres part numbers or jet size info etc.

Last edited by Miss_Undaztood; 08-06-10 at 11:53 PM.
  Reply With Quote
Old 09-06-10, 10:05 AM   #32
philbut
Guest
 
Posts: n/a
Default Re: I have a new project - and it has 4 wheels!!!

Quote:
Originally Posted by Miss_Undaztood View Post
If the needle valve is grooved it could be flooding, hence the poor fuel consumption and the mixture screw not doing much, especially if thats been screwed in too tight and grooved too. With the engine running, the screw should stall the engine if you wind it in enough. Jets are so small that they you cant really tell if their worn unless you compare them to new ones. Sounds like its gubbed.
Burlen fuel systems and carburettor hospital are good for parts for classic stuff, and for info, you might find the carb is a specific set up for the CF against other GM stuff.
I used to have some CF parts but i`m sure they got binned in a clearout years ago but i`ll have a look if I have anything your welcome to it.

EDIT: Infact, i`ve still got my Burlen catalogues, if you give me the details of the van i`ll have a look and tell you whats compatible and see if theres part numbers or jet size info etc.

Cool, that would be great. I have a complete spare carb which I might rip parts off when I collect it (its still with the seller as I ran out of room there were so many spares that came with the van).

The van is a 1971 CF, short wheel base, single wheel per hub on the rear. The engine is a 1975cc petrol with 4 speed manual box. As said, it's running the original Zenith carb (36IV - not the 36IVE), and a Delco dizzy (also original I think). 60k miles on the clock. If you can verify what other vehicles have the same carb that would be very helpful. The one I have my eye on is from a Vauxhall Viva / Victor 69-70. I know jetting will be different but I have the spec for the CF so I can order new jets.
  Reply With Quote
Old 09-06-10, 08:46 PM   #33
Miss_Undaztood
Guest
 
Posts: n/a
Default Re: I have a new project - and it has 4 wheels!!!

According to this carb book, the 1975cc CF was only from 1969-70 (another book says 69-72 tho), and has a 361V carb, which also fits :

1600 Viva HC 1971-72
1600 Viva HC and Firenza 1970-71
1600 Viva and Victor 1969-70, and 1970 on
1600 Victor 34 series,
1760 Viva and Victor FE 1972-73
2000 Victor FD35 1967-69

They all have different carb ref numbers, but they also all use the same needle valve ( B17258 ), floats, gaskets etc.
Looks like the carb you have your eye on would be a perfect match

Last edited by Miss_Undaztood; 09-06-10 at 08:48 PM.
  Reply With Quote
Old 10-06-10, 11:37 AM   #34
Davies
Guest
 
Posts: n/a
Default Re: I have a new project - and it has 4 wheels!!!

Who did you insure your van with in the end Phil? We're trying tio get decent quotes for our Mk2 Transit camper at the moment and can't get anything below £500 fully comp

Cheers,

Paul
  Reply With Quote
Old 12-06-10, 08:23 PM   #35
Sid Squid
No, I don't lend tools.
Mega Poster
 
Sid Squid's Avatar
 
Join Date: Jul 2003
Location: Skunk Works, Nth London
Posts: 8,680
Default Re: I have a new project - and it has 4 wheels!!!

£500! Bloody hell Paul - how can it cost that much? My VW is less than half of that for full comp.
__________________
If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing.

"a deathless anthem of nuclear-strength romantic angst"
Sid Squid is offline   Reply With Quote
Old 13-06-10, 10:01 PM   #36
philbut
Guest
 
Posts: n/a
Default Re: I have a new project - and it has 4 wheels!!!

I went with RH insurance. Cheepest by a long way at £113 fully comp! you ned to call their specialist vehicle section, not the camper van section. The cover isn't as good in the way of personal belongings etc but it has windscreen and the usual stuff more common with a car policy.

http://www.rhclassicinsurance.co.uk/
  Reply With Quote
Old 14-06-10, 09:43 AM   #37
Miss_Undaztood
Guest
 
Posts: n/a
Default Re: I have a new project - and it has 4 wheels!!!

Quote:
Originally Posted by philbut View Post
I went with RH insurance. Cheepest by a long way at £113 fully comp! you ned to call their specialist vehicle section, not the camper van section. The cover isn't as good in the way of personal belongings etc but it has windscreen and the usual stuff more common with a car policy.

http://www.rhclassicinsurance.co.uk/
Thats who my classic is insured with too.
  Reply With Quote
Old 14-06-10, 12:01 PM   #38
philbut
Guest
 
Posts: n/a
Default Re: I have a new project - and it has 4 wheels!!!

Right, I've ordered a new carb from the Viva / Victor '68-70. also got a NOS rebuild kit for £10 but no new jets with that, so I'll give it a go and see what happens with the economy. I'm assuming I'll have to swap the jets over but I'll just take a look when it arrives and compare with the stock spec on the Bedford.
  Reply With Quote
Old 16-06-10, 12:47 AM   #39
monkey
Guest
 
Posts: n/a
Default Re: I have a new project - and it has 4 wheels!!!

Quote:
Originally Posted by philbut View Post
Tis a bit bigger than the VWs - not as cool granted but i think it has character...
He he he he he ha ha ha ha ha ah he he he he he he he
bonk.
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
sv wheels ,,bandit wheels rvracing Mini-Twins 2 19-05-10 07:28 PM
possible project.:) mikelcfc The Madlanders 11 10-10-09 06:30 PM
Project TLS PAPPACLART Photos 65 15-08-07 09:14 PM
4 wheels good, 2 wheels better Dysparunia Bikes - Talk & Issues 6 30-11-06 07:37 AM
SV Project Fox Collision SV Talk, Tuning & Tweaking 5 23-05-06 02:28 PM


All times are GMT. The time now is 02:29 AM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.