My little SV based project - SV650.org

30-01-11, 07:06 PM

I've been at it for a while now, but its at a stage where it looks like a proper bike and it was wheeled out of the workshop for a few photos earlier today.

So the general idea is take a SV650 as a donor bike, use the great little engine and some of its components, and re-style it into a much more compact, desirable sports bike. Along the way, make some improvements to the performance and handling to make the bike as complete and enjoyable to ride as possible.

First stage, get some ideas down on paper. Quite a lot of sketches later and there was a clear direction to take the design forward.

With the sketch stage in process, it was time to get hold of an SV and take some of the critical dimensions. From this, a mock-up of the chassis design could be worked on using CAD. Note the design of a rear swingarm at this stage, something that has since been dropped.

With the chassis designed, a mock-up needed to be made to fit the engine.

The next stage was to build up the rolling chassis with the new frame and subframe, ready to prepare the bike for clay modeling.

Some months later, the bike finally emerges from the workshop for a few photos.

With the clay modeling process finished, the majority of the design work is complete and its time to start taking some fibreglass molds to make the bodywork.

Its still a long way from completion, but its now possible to get a good idea of what the finished bike will look like.

Theres a lot more detail about the project to date and other stuff Im working on, on my blog http://moto-rdesign.blogspot.com

Arron

30-01-11, 07:17 PM

mate first thats a ridiculasly profesonal job
i shall be following this closely

also that is screaming out for a under seat zaust

Geodude · 30-01-11, 07:20 PM

Thats looking really good fella.

30-01-11, 07:21 PM

Absolute respect, well done.
Looking forward to seeing more work

I could never do clay modeling, always ended up with a ball that looked nothing like I wanted to.
BTW what software you using? I'm wanting to do some design work mesen. Cheers

Nobbylad · 30-01-11, 07:30 PM

Amazing...btw - when you've done the moulds and laid the fairings up, bang me out a set and sort out some fixings for the stock pointy frame...ta

husky03 · 30-01-11, 07:38 PM

why did you go with the curvy style frame and not the pointy(obviously you have taste etc)

andrewsmith · 30-01-11, 07:40 PM

Thread subscribed!!!

Keep this you to date mate looks like a epic build.
You doing anything fancy with the exhaust?

yorkie_chris · 31-01-11, 12:02 AM

Cool.

IMO do yourself a favour now and ditch the stock front end and rear shock, forget about the standard geometry. When you get them handling sweet the numbers are pretty much a GSXR 600. Otherwise you will need to do that later and you wouldn't want to run into any clearance issues when making it handle as well as it looks.

Are you doing the lot yourself? What CAD package? Is this what you do or is it a hobby?

31-01-11, 12:11 AM

looks good so far

31-01-11, 09:05 AM

Little project? Wow!

30-01-11, 07:06 PM	#1
Todge Guest Posts: n/a	My little SV based project I've been at it for a while now, but its at a stage where it looks like a proper bike and it was wheeled out of the workshop for a few photos earlier today. So the general idea is take a SV650 as a donor bike, use the great little engine and some of its components, and re-style it into a much more compact, desirable sports bike. Along the way, make some improvements to the performance and handling to make the bike as complete and enjoyable to ride as possible. First stage, get some ideas down on paper. Quite a lot of sketches later and there was a clear direction to take the design forward. With the sketch stage in process, it was time to get hold of an SV and take some of the critical dimensions. From this, a mock-up of the chassis design could be worked on using CAD. Note the design of a rear swingarm at this stage, something that has since been dropped. With the chassis designed, a mock-up needed to be made to fit the engine. The next stage was to build up the rolling chassis with the new frame and subframe, ready to prepare the bike for clay modeling. Some months later, the bike finally emerges from the workshop for a few photos. With the clay modeling process finished, the majority of the design work is complete and its time to start taking some fibreglass molds to make the bodywork. Its still a long way from completion, but its now possible to get a good idea of what the finished bike will look like. Theres a lot more detail about the project to date and other stuff Im working on, on my blog http://moto-rdesign.blogspot.com Arron

30-01-11, 07:17 PM	#2
davepreston Guest Posts: n/a	Re: My little SV based project mate first thats a ridiculasly profesonal job i shall be following this closely also that is screaming out for a under seat zaust

30-01-11, 07:20 PM	#3
Geodude Member Mega Poster Join Date: Jun 2009 Location: Durham Posts: 2,669	Re: My little SV based project Thats looking really good fella. __________________ Black naked 1999 sv650 which im trying to keep happy Custom paintwork *Saragon Customs* Spray painting *Electrical fault finding guide* and *Regulator rectifier test* Only a biker knows why a dog sticks his head out of a car window.

30-01-11, 07:21 PM	#4
ChrisSV Guest Posts: n/a	Re: My little SV based project Absolute respect, well done. Looking forward to seeing more work I could never do clay modeling, always ended up with a ball that looked nothing like I wanted to. BTW what software you using? I'm wanting to do some design work mesen. Cheers

30-01-11, 07:30 PM	#5
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: My little SV based project Amazing...btw - when you've done the moulds and laid the fairings up, bang me out a set and sort out some fixings for the stock pointy frame...ta

30-01-11, 07:38 PM	#6
husky03 Member Mega Poster Join Date: Jul 2006 Location: Scotland Posts: 2,568	Re: My little SV based project why did you go with the curvy style frame and not the pointy(obviously you have taste etc)

30-01-11, 07:40 PM	#7
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: My little SV based project Thread subscribed!!! Keep this you to date mate looks like a epic build. You doing anything fancy with the exhaust? __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

31-01-11, 12:02 AM	#8
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: My little SV based project Cool. IMO do yourself a favour now and ditch the stock front end and rear shock, forget about the standard geometry. When you get them handling sweet the numbers are pretty much a GSXR 600. Otherwise you will need to do that later and you wouldn't want to run into any clearance issues when making it handle as well as it looks. Are you doing the lot yourself? What CAD package? Is this what you do or is it a hobby? __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

31-01-11, 12:11 AM	#9
barwel1992 Guest Posts: n/a	Re: My little SV based project looks good so far

31-01-11, 09:05 AM	#10
wyrdness Guest Posts: n/a	Re: My little SV based project Little project? Wow!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Competency-based interviews	missyburd	Idle Banter	24	28-09-10 05:18 PM
Fax based riders - MOT required	Gazza77	Pennine Massive	6	09-03-10 10:00 AM
New and London based	LorryDriver	Soho Massive	28	06-10-09 05:51 PM
Anyone on the .org based in Holland?	Tim in Belgium	Idle Banter	11	01-02-08 08:00 PM
Plymouth based sv	bikerskez	Photos	5	22-02-06 12:42 PM