SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
25-06-06, 06:59 PM | #1 |
Guest
Posts: n/a
|
W Reg 2000 SV650s Possibly breaking for Spares
Will check Cam Tensioners firstly
|
25-06-06, 07:15 PM | #2 |
Guest
Posts: n/a
|
Not being funny but have you checked the cam chain tensioners before you break the bike
|
25-06-06, 07:20 PM | #3 |
Guest
Posts: n/a
|
Hi, tried to the 2nd gear roll back thing, to no avail, I assume you r,oll it back with the clutch out
Will make one last attempt at adjusting it... What kind of sound does it make when they fail, this kicks in around 2.5k upwards and sounds like it's going to fall into peices |
25-06-06, 07:24 PM | #4 |
Guest
Posts: n/a
|
It's a rattling noise my front one failed and had to be replace a common fail with the CURVEY I would definitely check that first especially with the low mileage on your bike!!!!!!!!!!!!!1
|
25-06-06, 07:42 PM | #5 |
Guest
Posts: n/a
|
Does it sound like a bag of marbles inside the engine, how much was it to fix, my bike was a litre of oil down and I thought that might have caused failure
|
25-06-06, 08:00 PM | #6 |
Guest
Posts: n/a
|
Yeh it sounds a bit like that it cost me about £140 but I had the plugs done at the same time!!!!
|
25-06-06, 08:02 PM | #7 |
Guest
Posts: n/a
|
If it's not the tensor (but it could well be, search 'tensor' and you'll find methodology), whey not buy a engine from somewhere, i got one from the local scrappy for £250, not that hard to put it in, just do the opposite of taking the old one out
|
25-06-06, 08:02 PM | #8 |
Guest
Posts: n/a
|
Matey, you've been a big help, I told my mate and he's gonna come round to check, are the manual adjusters any good.
|
25-06-06, 08:06 PM | #9 | |
Guest
Posts: n/a
|
Quote:
remove air box, remove carbs, put the front cylinder in TDC remove 2 bolts and out with the old tensor, unseize or replace it, new gaskets (about £2) and replace every thing in the reverse order were the plugs gold plated |
|
25-06-06, 08:06 PM | #10 |
Guest
Posts: n/a
|
I was gonna just buy an engine, but I was thinking about trading up anyway, so the less money I have to spend the better. I'll try the tensioner and go from there.
Cheers |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SV650K2 (Silver) breaking for spares | mjf65 | For Sale - SV's and SV related items | 57 | 04-09-08 07:56 PM |
Bargain Pointy SV650S for sale - or breaking for spares! | polishmart | For Sale - SV's and SV related items | 11 | 08-07-08 06:04 PM |
2000 SV650S Yellow for breaking | aadeyc73 | For Sale - SV's and SV related items | 30 | 06-05-08 10:53 PM |
W Reg 2000 SV650s Possibly breaking for Spares | ChrisBairstow001 | For Sale - SV's and SV related items | 10 | 02-07-06 07:29 AM |
W Reg 2000 SV650s Breaking | ChrisBairstow001 | For Sale - SV's and SV related items | 13 | 28-06-06 10:19 PM |