SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
05-03-09, 02:18 PM | #1 |
Guest
Posts: n/a
|
Idle adjuster not turning?
Hi all
My K2 SVS is currently running at about 1400 - 1500rpm when at idle so the adjuster on the left needs moving a bit to bring the idle down slightly. The adjuster needs moving anti-clockwise to decrease the idle speed. However when I try to move the adjuster it doesn't move, instead the whole assembly behind it and the cable attached to it twists around with the adjuster knob. This is with the other hand trying to stop the assembly moving as well. Have I reached a limit to how far the adjuster can be screwed anti-clockwise? If the idle adjuster doesn't work I guess a carb sync tool is in order. Cheers! |
05-03-09, 02:20 PM | #2 |
Member
Mega Poster
Join Date: Jul 2006
Location: Scotland
Posts: 2,568
|
Re: Idle adjuster not turning?
give the cable a scoot of lubricant and check its been routed correctly
|
05-03-09, 03:06 PM | #3 |
No, I don't lend tools.
Mega Poster
Join Date: Jul 2003
Location: Skunk Works, Nth London
Posts: 8,680
|
Re: Idle adjuster not turning?
The threaded section of the adjuster is stuck, (common), free that off and it'll be OK.
__________________
If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst" |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Engine Adjuster | cammy | Stuff Wanted | 1 | 24-04-09 08:33 PM |
Preload adjuster help | scottjames | SV Talk, Tuning & Tweaking | 10 | 03-02-09 12:13 AM |
Idle Adjuster Screw | mattglavin | SV Talk, Tuning & Tweaking | 11 | 11-10-07 12:37 PM |
How does the pre-load adjuster look? | Professor | SV Talk, Tuning & Tweaking | 19 | 23-05-05 07:23 AM |