SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
18-02-09, 09:00 AM | #1 |
Guest
Posts: n/a
|
Torque Settings - Spark Plugs & Oil Drain Bolt
Found a service manual for a K3 which says the torque settings for the spark plugs is 11nm and oil drain bolt is 21nm. Would this be the same for my K6?
|
18-02-09, 09:08 AM | #2 |
Member
Mega Poster
Join Date: Jul 2003
Location: In the shadows to the left
Posts: 7,700
|
Re: Torque Settings - Spark Plugs & Oil Drain Bolt
Yes.
|
18-02-09, 09:56 AM | #3 |
Member
Mega Poster
Join Date: Mar 2004
Location: Not in Yorkshire. (Thank God)
Posts: 4,116
|
Re: Torque Settings - Spark Plugs & Oil Drain Bolt
personally I would say never use a torque wrench for these, in over 30 years of using spanners, I have never stripped a plug or drain thread. But have had to pick up the pieces when others have.
Do it by feel. Neither are fasteners, they simply need to be tight enough to stay put.
__________________
Not Grumpy, opinionated. |
18-02-09, 10:17 AM | #4 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: Torque Settings - Spark Plugs & Oil Drain Bolt
No do not torque a spark plug. Read the back of the box. IIRC it's finger tight then 1/4 turn or something to seat the crush washer, but check because it could be 1/2 a turn.
Use a little copper slip on the threads. Sump plug, as above.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
18-02-09, 10:13 PM | #5 |
Guest
Posts: n/a
|
Re: Torque Settings - Spark Plugs & Oil Drain Bolt
To be honest I thought it was a bit OTT for torque settings on these parts but just wanted to be sure.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front & rear brake bolt torque settings required. | svsk2 | SV Talk, Tuning & Tweaking | 2 | 02-05-09 04:13 PM |
torque settings | carlSV | SV Talk, Tuning & Tweaking | 2 | 01-06-06 10:24 AM |
Torque settings | Daimo | SV Talk, Tuning & Tweaking | 7 | 12-09-05 04:04 PM |
Oil drain bolt not tightening to specified torque | Raf | SV Talk, Tuning & Tweaking | 32 | 10-04-05 12:24 PM |
TORQUE SETTINGS | chewy22 | SV Talk, Tuning & Tweaking | 1 | 20-02-05 07:58 PM |