SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
hello
just wondered what standard power output would be for a standard sv and if anyone has ever done a big bore sv. just wondered how much difference the extra cc made cheers Ross |
![]() |
![]() |
#2 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
68-71bhp.
Been done. How much money do you have to exchange for power? 100bhp will cost you £2k at least.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
i have brought a road sv to turn into a race bike. but just come back from the dyno and my bike had 78 hp, but had over 10hp difference at 7000rpm.The bike also had loads more torque
The bike i was comparing it against is right on the limit for racing so wondered why my bike was showing more power. |
![]() |
![]() |
#4 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
You can get that with race pipes, filter, cams.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
it only has a can on it and race filter, sure something must been done inside the engine. only problem is i am only allowed 72 h for the bemsee minitwin series
|
![]() |
![]() |
#6 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Cams then, do you know which ones are fitted?
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
no aint got a clue, it was meant to be standard engine
|
![]() |
![]() |
#8 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
So it's a lot stronger compared to a minitwins limit engine.. compared on the same dyno etc?
Get the spanners out and have a look. I doubt anyone would have big bored it without a proper race system first.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]()
it is a lot stronger than a minitwins engine, and the dyno guy said even with just cams in it you would not expect to get that much power gain, not all over the power band and with the massive increase in torque.
|
![]() |
![]() |
#10 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Short of pulling it to bits and measuring the bore I don't know how you would look at this.
Have a gander down the inlet port and see if it looks stock or ported.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
LED output? | noob-saibot | SV Talk, Tuning & Tweaking | 7 | 25-11-08 10:13 PM |
Oil leak output shaft help | mattc | SV Talk, Tuning & Tweaking | 3 | 05-05-08 05:48 PM |
How easy is it to change the output shaft bearing? | arenalife | Bikes - Talk & Issues | 5 | 28-11-06 10:28 PM |
Power Commander power graph print outs. | JimPSV | SV Talk, Tuning & Tweaking | 19 | 27-11-06 09:39 AM |
Checking Power output | Morpheus | SV Talk, Tuning & Tweaking | 1 | 05-11-04 10:54 AM |