 |
 |
| SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
03-12-05, 02:19 PM
|
#1 |
|
Guest
Posts: n/a
|
Screwed
Help!
I have bought a tail tidy for my new K5 SV650, but I am having a problem removing the screw that holds the side panel to the subframe, I have tried WD40, rachet screwdrivers, hammer! etc but it will not budge. I am also having the same problem with the screw on the left side bar-end. Tips anyone, as I have paid for items that I cannot fit 
|
|
|
03-12-05, 03:38 PM
|
#2 |
|
Guest
Posts: n/a
|
find yourself a piece of brass and a hammer then put the brass drift over the offending screw and give a sharp tap with the hammer this can loosen off corrosion on the threads be carefull not to impact too hard as the frame is a cast alloy.
or get a decent impact driver and the relevant sized hex bit for the end . when finished change the damn bolt if damaged or put copperease on the threads on reinstall |
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Screwed. Can you help? | ooger | SV Talk, Tuning & Tweaking | 21 | 04-10-08 11:09 AM |
| I'm Screwed..... | Girth | Bikes - Talk & Issues | 4 | 09-09-07 03:34 PM |
| Just been Screwed By Letting agency | 454697819 | Idle Banter | 8 | 06-11-06 08:19 AM |
| I think I've really screwed up the elecrics this time... | Italianjob | SV Talk, Tuning & Tweaking | 5 | 12-08-05 04:36 PM |
| Is my suspension screwed or do I need an upgrade? | MattTheLoony | SV Talk, Tuning & Tweaking | 18 | 08-07-05 12:09 PM |
