SV650.org - SV650 & Gladius 650 Forum



SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 11-06-06, 10:54 PM   #1
Diveboy
Guest
 
Posts: n/a
Default Numb wrists?

Recently I have been getting numb hands/wrists from long journeys on the SV. I was wondering if progressive springs might help solve the problem. On the standard springs i have them set quite hard for cornering.
  Reply With Quote
Old 12-06-06, 08:45 AM   #2
SVeeedy Gonzales
Guest
 
Posts: n/a
Default

Try rotating the clutch and front brake controls round (down) by 10-20 degrees first? In their normal position they're a bit high and aren't as easy on the wrists. Only takes and 8 and 10mm spanner and 5 mins to change them.
  Reply With Quote
Old 12-06-06, 08:56 AM   #3
Viney
Member
Mega Poster
 
Join Date: Jul 2003
Location: In the shadows to the left
Posts: 7,700
Default

Quote:
Originally Posted by SVeeedy Gonzales
Try rotating the clutch and front brake controls round (down) by 10-20 degrees first? In their normal position they're a bit high and aren't as easy on the wrists. Only takes and 8 and 10mm spanner and 5 mins to change them.
Agreed. I used my girfriends SV last week and through traffic my wrists started aching. My SV has the lever rotated, as suggested, and all is cool again

Oh and be careful doing up the bolts, they strip rrrrrreallllly easy.
Viney is offline   Reply With Quote
Old 12-06-06, 09:06 AM   #4
fizzwheel
Super Moderator
Mega Poster
 
fizzwheel's Avatar
 
Join Date: Dec 2003
Location: Somerset
Posts: 3,614
Default

Agreed, rotate your levers round that makes it alot more comfortable.

The other thing that I found helps on along trip was to relax and not grip the bars to tightly.
__________________
Look Dave, I can see you're really upset about this. I honestly think you ought to sit down calmly, take a stress pill, and think things over.

K5 GSXR 750 Anniversary Edition
fizzwheel is offline   Reply With Quote
Old 12-06-06, 09:56 AM   #5
kciN
Guest
 
Posts: n/a
Default

Hmmmm Rotate levers, why didn't I think of that!

My right wrist aches as I tend to ride with index finger on front brake and put's undue strain and hurts after quite a short period!
Left hand is fine!

I think I'll 'rotate' later!
  Reply With Quote
Old 12-06-06, 10:07 AM   #6
K
Guest
 
Posts: n/a
Default

Ooooh, now that sounds like something easy and simple enough I could try it and be successful!

I get a problem with a numb spot on my right hand, basically all of my little finger, down the edge of my hand and that side of my wrist. I get it even on short trips of about 70 miles or so - though part of the reason is a couple of badly healed broken bones to that area.
  Reply With Quote
Old 12-06-06, 10:17 AM   #7
Marshall
Guest
 
Posts: n/a
Default

why have i never thought of this, my right hand goes to sleep all the time, i hope this helps

Cheers
Marshall
  Reply With Quote
Old 12-06-06, 02:12 PM   #8
ujoni08
Guest
 
Posts: n/a
Default wrists

On the subject, has anyone rotated the bars on the forks? I've moved the levers down, but want to rotate the bars forwards a bit, to relieve pressure on the ulnar nerve (outer part of the palm). If I put a T-square on each of the the grips, they meet at a point in the middle of my chest, which not where my arms attach to my body. I don't know why Suzuki fits the bars at such an angle. This means all my weight is on the outer part of my palms. Problem is, there's a small casting under the top yoke to prevent accidental rotation. I'd have to cut off the casting (a small blob of alloy) to do this. I think this would relieve a lot of the wrist ache. Anyone done this, or have any thoughts?
Jon.
  Reply With Quote
Old 12-06-06, 03:56 PM   #9
fubber
Guest
 
Posts: n/a
Default

I fitted gel padding into my gloves to alleviate pressure on the ulnar nerve - took the padding out of an old pair of cycling gloves I had lying around, small change, big difference...
  Reply With Quote
Old 12-06-06, 04:56 PM   #10
Quiff Wichard
Member
Mega Poster
 
Quiff Wichard's Avatar
 
Join Date: Aug 2004
Posts: 4,864
Default Re: wrists

Quote:
Originally Posted by ujoni08
On the subject, has anyone rotated the bars on the forks? I've moved the levers down, but want to rotate the bars forwards a bit, to relieve pressure on the ulnar nerve (outer part of the palm). If I put a T-square on each of the the grips, they meet at a point in the middle of my chest, which not where my arms attach to my body. I don't know why Suzuki fits the bars at such an angle. This means all my weight is on the outer part of my palms. Problem is, there's a small casting under the top yoke to prevent accidental rotation. I'd have to cut off the casting (a small blob of alloy) to do this. I think this would relieve a lot of the wrist ache. Anyone done this, or have any thoughts?
Jon.
isnt hter a screw undernesth each clip on that means you haveto have them at that angle.?... I mean near the tank side.. not hte main bolt that tightens it up-

if you change the angle etc.. will it not affect your turning and possible snag on the tank?
__________________
ooops I did it again ... new bike . cb1000r
Quiff Wichard is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
right hand goes numb jans1971 Bikes - Talk & Issues 30 30-09-08 11:28 AM
Numb Nuts!! sisk650k4 Pennine Massive 7 23-03-08 10:58 PM
Numb fingers Ed Idle Banter 6 10-05-07 02:46 AM
owwww my wrists! remf179 SV Talk, Tuning & Tweaking 25 24-04-07 11:13 AM
SV wrists Special Mike SV Ecosse 12 10-03-07 10:08 AM


All times are GMT. The time now is 11:13 AM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.