SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
27-05-20, 08:04 AM | #1 |
Member
Mega Poster
Join Date: May 2015
Posts: 1,238
|
Cam covers after valve clearance check - RTV, Hylomar, Wellseal?
In a month or so I'll have 15K on my Gen3, so I'm planning to check the valve clearances.
My question is, when replacing the cam covers, what's the preferred sealant for the rubber half-moons? I have some high-temp black silicone RTV, and also Blue Hylomar. Should I also put a trace of sealant around the rubber cover gasket too? Thanks. |
27-05-20, 12:33 PM | #2 |
Member
Join Date: Aug 2019
Posts: 48
|
Re: Cam covers after valve clearance check - RTV, Hylomar, Wellseal?
On my 2003 SV650S, the valve cover gaskets stayed stuck to the cylinder heads. Just had to make sure the gasket mated properly with the covers when replacing.
__________________
65 CB160 (67-69), 69 350GTR (69-72), 72 R5, 73 RD350 (73-84), 82 XZ550 Vision (84-03), 01 Concours C10 (03-19), 89 EX250 (11-14), 00 SV650S (14-16), 03 SV650S (19-) |
27-05-20, 04:27 PM | #3 |
Member
Join Date: Mar 2018
Posts: 60
|
Re: Cam covers after valve clearance check - RTV, Hylomar, Wellseal?
Yep, if the gaskets are intact they shouldn't need any extra sealant.
|
27-05-20, 05:46 PM | #4 |
Member
Join Date: Oct 2007
Posts: 537
|
Re: Cam covers after valve clearance check - RTV, Hylomar, Wellseal?
Yes if your careful the gaskets should come off whole. I used a feeler gauge to go round unsticking it rather than just pull on the cover...
|
27-05-20, 06:09 PM | #5 |
Member
Mega Poster
Join Date: May 2015
Posts: 1,238
|
Re: Cam covers after valve clearance check - RTV, Hylomar, Wellseal?
Thanks everyone!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Valve clearance check help! | allantheboss | Soho Massive | 20 | 30-03-12 05:34 PM |
Valve clearance check help! | allantheboss | Guildford Massive | 1 | 27-03-12 12:39 AM |
Valve clearance check? | suzuki madboy | SV Talk, Tuning & Tweaking | 8 | 24-04-11 09:23 AM |
Done a valve clearance check, how do I preceed now? | MrTom | SV Talk, Tuning & Tweaking | 15 | 02-02-10 08:09 PM |
Hylomar sealant usable at valve-covers? (& grease question) | philbond07 | SV Talk, Tuning & Tweaking | 12 | 26-09-08 12:19 AM |